A hostname canonicalization vulnerability in the email HTML sanitizers of Zimbra Collaboration Suite (ZCS) allows an unauthenticated sender to bypass the restriction on forms that target the Zimbra host. DefangFilter and the OWASP ActionAttributePolicy compare the form-action hostname with the request hostname before browser URL canonicalization. A percent-encoded hostname can therefore survive sanitization while the browser submits the form to the normal Zimbra origin with the recipient's authentication cookie. This permits authenticated form requests from a crafted email after the recipient opens it in Classic and submits the form. The issue is present in ZCS 10.1.16 and 10.1.21. It does not bypass an endpoint's CSRF-token checks; a state-changing attack additionally requires an endpoint that accepts the resulting request without that protection.
An organizer authentication vulnerability in Zimbra Collaboration Suite (ZCS) allows an unauthenticated email sender to insert calendar invitations attributed to another user. The email delivery path permits external invitations but does not verify that the message sender is authorized to use the iCalendar ORGANIZER identity. When automatic invitation insertion is enabled, a crafted REQUEST component creates an event containing attacker-selected meeting details and reminders under a forged organizer without recipient interaction. No corresponding event is created in the claimed organizer's calendar. ZCS 10.1.16 and 10.1.21 are affected.
An attendee authentication vulnerability in the email calendar processing of Zimbra Collaboration Suite (ZCS) allows an unauthenticated sender to forge another attendee's response to an existing meeting. Zimbra passes a null sender identity when processing iCalendar REPLY components, causing the attendee authorization filter to be skipped. An attacker who knows the meeting UID, organizer address and attendee address can send a non-outdated reply that changes the attendee's participation status in the organizer's calendar. The change occurs automatically during delivery without organizer or attendee interaction. ZCS 10.1.16 and 10.1.21 are affected.
An organizer authentication vulnerability in the email calendar processing of Zimbra Collaboration Suite (ZCS) allows an unauthenticated sender to cancel or modify an existing meeting in a recipient's calendar. Zimbra accepts iCalendar CANCEL and REQUEST components without verifying that the email sender is authorized to act as the supplied organizer. An attacker who knows the meeting UID and organizer address can supply a non-outdated sequence number to move the recipient's meeting to Trash or replace its details. Processing occurs automatically during email delivery without recipient interaction. ZCS 10.1.16 and 10.1.21 are affected.
Entire CLI hooks into Git workflows to capture AI agent sessions. Prior to version 0.7.7, a path traversal vulnerability in Entire CLI allows an attacker with push access to the checkpoints repository to craft malicious checkpoint metadata that causes entire session resume or entire checkpoint rewind to write attacker-controlled transcript data outside of the expected session directory. The issue occurs because checkpoint metadata is fetched from the remote entire/checkpoints/v1 branch and the SessionID field was used to construct filesystem paths without validation in the restore path. A malicious SessionID containing absolute paths or path traversal sequences could cause arbitrary files on the victim’s machine to be overwritten. This issue has been patched in version 0.7.7.
NetBox MCP Server is a simple read-only Model Context Protocol server for NetBox. Prior to version 1.2.1, when running with TRANSPORT=http, the MCP server has no authentication on the HTTP endpoint. Any client that can reach the port gets a valid MCP session and full access to all four NetBox tools - no token or credential needed. This issue has been patched in version 1.2.1.
The GTM Server Side plugin by stape.io implements server-side tracking on WordPress websites. From version 2.0.0 to before version 2.1.48, the WooCommerce purchase event tracking mechanism allows an unauthenticated attacker to trigger the rendering of another customer's full order data — including personally identifiable information (PII) — into the page's JavaScript dataLayer. This issue has been patched in version 2.1.48.
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. In versions 25.12 and prior, odhcpd's DHCPv6 self-loop detection at dhcpv6.c:720 uses a network-byte-order DUID length value directly as the memcmp() size parameter. On little-endian hosts, this causes memcmp() to read far beyond the stack buffer — a single unauthenticated DHCPv6 packet triggers a 2560-byte overread from a 128-byte buffer. At time of publication, there are no publicly available patches.
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA response handler writes past the end of a fixed 512-byte stack buffer (pdbuf) when a single DHCPv6 REQUEST carries enough IA options to nearly exhaust the reply space. Two independent overflow sites exist in the same call chain, both reachable from the network via a single unauthenticated UDP packet. odhcpd runs as root on OpenWrt; embedded targets often lack stack canaries and ASLR, making code execution realistic. This issue has been patched in version 25.12.
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. From version 17.01.0 to before version 25.12.3, odhcpd's DHCPv6 IA parser accepts an IA_NA or IA_PD option whose body is shorter than struct dhcpv6_ia_hdr, casts the option header to that full structure, and reads ia->iaid before proving that the IA body contains the IAID field. If an unauthenticated network-adjacent client places a zero-length or otherwise short IA option at the end of odhcpd's 8192-byte receive stack buffer, the IAID read crosses from data_buf into adjacent stack memory. The disclosed bytes are then reflected in the DHCPv6 reply IAID; prior ARM validation showed data_buf[8192:8196] disclosing the saved stack canary, and wider stack scans can leak ASLR-useful stack/process contents. This issue has been patched in version 25.12.3.
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA handler keeps a per-message `first` lease pointer so multiple IA options in one message reuse the same Reconfigure authentication key. A DHCPv6 REQUEST from an adjacent-network client can make the first IA set `first`, then make a later same-IAID IA fail the on-link check and free that same lease, leaving `first` dangling. A following IA in the same packet allocates a new lease and copies `first->key`, producing a 16-byte heap-use-after-free read. ASan confirms the UAF; native tracing shows the packet shape can deterministically reclaim the freed lease as the destination allocation, producing a zeroed Reconfigure key copy. The validated impact is unauthenticated adjacent-network denial of service and DHCPv6 Reconfigure/ForceRenew key confusion. Arbitrary PC control is not proven for this UAF alone. This issue has been patched in version 25.12.
A local privilege escalation vulnerability in the Zimbra Collaboration Suite (ZCS) MTA package allows the Unix zimbra account to execute arbitrary commands as root. The installed sudo policy permits passwordless root execution of Postfix administration commands without restricting their arguments. An attacker can select a zimbra-controlled daemon_directory in the Postfix configuration and invoke postfix set-permissions, causing Postfix to execute the attacker's post-install program as root. The Postfix configuration directory is also writable by zimbra, so restricting postconf alone does not remove the execution path. Exploitation requires local command execution as zimbra on an MTA node. ZCS 10.1.16 and 10.1.21 are affected.
A local privilege escalation vulnerability in the zmmailboxdmgr launcher of Zimbra Collaboration Suite (ZCS) allows the Unix zimbra account to execute arbitrary commands as root. The passwordless sudo interface accepts JVM arguments that are not adequately restricted. An attacker can postpone Jetty's privilege drop, register an OnOutOfMemoryError command and force heap exhaustion during startup, causing the command to execute while the JVM still runs as root. Exploitation requires local command execution as zimbra on a mailbox server and interrupts mailboxd during the malicious restart. ZCS 10.1.16 and 10.1.21 are affected.
A request attribute override vulnerability in Zimbra Collaboration Suite (ZCS) allows unauthenticated requests to /h/* to populate servlet attributes intended for trusted internal dispatch. RestFilter copies URL parameters specifying an authentication token, target account, target item and dispatch state into the request attributes consumed by the Classic Web Client. Combined with CVE-2026-10632 on ZCS 10.1.16, this allows an attacker to supply their own valid token and document identifiers and execute JavaScript in another user's signed-in browser session. ZCS 10.1.17 blocks that XSS chain by changing the document renderer, but retains the request attribute override.
A mailbox quota-accounting vulnerability in Zimbra Collaboration Suite (ZCS) allows an authenticated user to consume another user’s mailbox quota by repeatedly sharing and revoking a document. Creation of the recipient’s shared-file record charges the document size to mailbox-wide usage. Revocation deletes the record and reverses its folder counters without reversing the mailbox-wide charge. Repeated normal share notifications therefore accumulate quota usage after the visible records are gone. On accounts with a finite quota, this can prevent incoming mail and other size-increasing operations without recipient interaction. The issue affects ZCS 10.1.16 and 10.1.20.
An SMTP command injection vulnerability in the data-source testing functionality of Zimbra Collaboration Suite (ZCS) allows an ordinary authenticated user with account options enabled to inject CR/LF into the emailAddress inserted into an SMTP envelope command by a JSON SOAP request. After a successful preliminary POP3 or IMAP login, Zimbra sends the injected commands to the selected SMTP service. If that service accepts the pipelined transaction, the attacker can submit mail with attacker-selected recipients, headers and body content without victim interaction. The vulnerable command-construction path is present in ZCS 10.1.16 and 10.1.20.
serialize-javascript from 7.0.1 before 7.1.3 contains a cross-site scripting vulnerability that allows attackers to break out of HTML script elements by ending serialized function source text with an unescaped </script. Attackers controlling a function's source via a spoofed toString() can combine surrounding output delimiters and later values to inject live markup such as img onerror handlers.
baserCMS is a website development framework. Starting in version 5.0.0-beta1 and prior to versions 5.3.2 and 5.4.2, `PermissionGroupsService::build()` reads a plugin's `config/permission.php` to decide what each user group may reach. When that file is absent it writes a wildcard allow rule instead: `url` `/baser/<prefix>/<plugin>/*`, `method` `*`, `auth` true, for every non-admin group. BcCustomContent has no such file in any release. After an administrator installs it, the default `operators` group can store and execute arbitrary PHP under the document root. Versions 5.3.2 and 5.4.2 patch the issue.
baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the public POST /baser/api/bc-mail/mail_messages/add/{mailContentId}.json endpoint accepts submissions without enforcing the form's auth_captcha setting. BcMail\Controller\Api\MailMessagesController::add() and MailMessagesService::create() omit the BcCaptchaService::check() verification of captcha_id and auth_captcha performed by MailController::submit() in the web UI. An unauthenticated attacker who can reach the API can therefore automate submissions without solving the enabled image challenge. The API disables FormProtection and has no rate limit; submissions can generate administrator-inbox spam, send attacker-influenced auto-replies to third parties when an email field is present, and accumulate mail_messages database records when save_info is enabled. The API already enforces the isAccepting() check added for CVE-2026-30878; the missing CAPTCHA check is a separate control failure. This issue has been patched in versions 5.3.2 and 5.4.2.
baserCMS is a website development framework. In versions 5.2.5 before 5.3.2 and 5.4.0 before 5.4.2, an unauthenticated visitor can supply a comma-separated address list in a public mail form's email field and cause a single auto-reply to be addressed to multiple third parties. MailMessageMailer::sendFormToUser() passes the visitor-controlled userMail value to parseAndNormalizeMailAddresses(), which splits it with explode(',') and supplies every resulting address to setTo(). Newly created forms with an email-type field are affected when the separate, optional VALID_EMAIL server-side validation is not enabled; browser type=email validation does not prevent crafted requests. The bundled contact form enables VALID_EMAIL and is not affected. The auto-reply uses the site's sender identity and includes partially attacker-controlled content, allowing abuse of the site to deliver unsolicited mail. This issue has been patched in versions 5.3.2 and 5.4.2.
baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, global shortcode expansion runs over the complete rendered page, including HTML-escaped blog comments supplied by unauthenticated visitors. A comment containing the BcBaser.getGoogleMaps shortcode can set apiBaseUrl to an attacker-controlled script URL, which is emitted as a script src and executes JavaScript on the site's origin when another visitor or administrator opens the article displaying that comment. Escaping raw HTML in comments does not prevent this stored cross-site scripting because shortcode processing happens after HTML rendering. Other registered shortcodes also expand in comments; Mail.getForm can embed a working contact form with a valid CSRF token. The flaw can compromise the authenticated browser context of an administrator who views the affected article. This issue has been patched in versions 5.3.2 and 5.4.2.
baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the widget-area entity serializes widgets only when the submitted value is an array, allowing a string submitted through the admin JSON API to be stored unchanged. Entity reads, including front-end rendering and API responses, deserialize the stored value with unserialize() without an allowed_classes restriction, accepting both raw and base64-encoded serialized data. An administrator, or an attacker who obtains widget-write capability through a separate vulnerability such as chained XSS, can plant an object graph that subsequently triggers on unauthenticated page requests. Two demonstrated gadget chains in the default dependency set use composer/composer ProcessExecutor::startJob() with Process::fromShellCommandline(), or logiscape/mcp-sdk-php StdioTransport::connect() with StdioServerParameters, to reach proc_open() and execute commands as the web-server user. Deserialization bypasses constructor-based readonly safeguards, and the stored payload can execute repeatedly until the database row is repaired. Unauthenticated page access is a trigger after privileged payload storage, not an unauthenticated means of initially planting the payload. This issue has been patched in versions 5.3.2 and 5.4.2.
baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, an authenticated user with only theme-file view permission can traverse outside the theme directory through the optional BcThemeFile plugin's Admin web screen. ThemeFilesController::parseArgs() constructs a path containing literal ../ segments, and the view and edit actions pass it to ThemeFilesService::get() without containment validation. Authorization checks the unresolved request path, after which ThemeFile::_getContents() reads the resolved file and exposes its contents in the form textarea. A client must preserve the dot segments rather than normalize them away. Readable files are limited to .php, .css, .js, and .ctp; this can disclose application source and config/install.php database credentials in MySQL or PostgreSQL deployments, while SQLite configurations have an empty database password. Reading config/app_local.php may expose the Security.salt fallback, which is effective only when not overridden by environment configuration. The flaw does not disclose .env, .pem, or SQLite .db files, does not itself permit file writes or code execution, and does not affect the separate API getFullpath() route. The plugin is disabled by default and unauthenticated requests are not sufficient. This issue has been patched in versions 5.3.2 and 5.4.2.
baserCMS is a website development framework. In versions 5.2.3 before 5.3.2 and 5.4.0 before 5.4.2, the optional BcThemeFile plugin's Admin API validates a raw path in ThemeFilesService::update() and getFullpath(), but ThemeFileForm::_execute() subsequently applies rawurldecode() to fullpath before writing. Because normalizePath() resolves only literal dot segments, percent-encoded traversal can pass the containment checks and become a path outside the theme directory at the write sink. An authenticated administrator can write PHP files into writable locations such as webroot and execute them, exceeding the intended theme-template editing boundary. The source also identifies the same check-before-decode ordering in ThemeFilesService::copy(), although that path was not dynamically verified. Exploitation requires the non-default plugin, an administrator session, and a same-origin Origin header; USE_CORE_ADMIN_API=false does not block session-authenticated requests. The Admin web form is not affected by this encoded-path tampering because FormProtection protects fullpath. This is a third bypass of the protections associated with CVE-2026-30940, using encoded traversal decoded after validation. This issue has been patched in versions 5.3.2 and 5.4.2.
baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, list and detail actions in the Admin and Api/Admin prefixes pass request query parameters, including contain, conditions, fields, finder, and order, directly to the ORM as options. A user able to log into the admin panel can embed SQL fragments in those options to execute arbitrary SQL against the application's database, including reading password hashes from the users table. Public-page and public-API fixes released in 5.3.1 and 5.4.1 did not protect these administrative paths. Setting USE_CORE_ADMIN_API to false does not prevent access through an authenticated browser session. This issue has been patched in versions 5.3.2 and 5.4.2.
Missing authentication for a critical function in the Android Debug Bridge daemon (adbd) in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 allows an attacker to obtain an unauthenticated shell (uid 2000), a foothold for privilege escalation to root. The device ships with ro.adb.secure=0 (no host key authorization) and USB ADB enabled by default; ADB over TCP is not enabled by default but, once enabled (e.g. via the shipped /system/bin/adbd_tcp.sh or 'setprop persist.adb.tcp.port 5555'), the same unauthenticated shell is reachable over the network (CVSS 4.0 base 9.3).
Missing authorization in the system-privileged 'DJIUpdateService' binder in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 on Android allows a local application with no permissions to invoke privileged operations, including factory reset with user-data wipe (transaction 153), shutdown (105), clock/timezone change (101/123), and the firmware-apply hand-off (151), because onTransact() performs no caller-identity or permission check.
OS command injection in the root-privileged 'hardware_monitor' helper in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 on Android allows a local unprivileged process to execute arbitrary commands as root by writing a crafted line to the Android log (logcat), which the helper reads and passes to a shell eval.
Missing authorization in the native binder service 'android.dji.server' (transaction code 1018) in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 on Android allows a local application with no permissions to execute arbitrary OS commands as root, because the handler passes a caller-supplied string to system() in the root-privileged 'assistant' daemon without any caller-identity or permission check.
Hidden functionality (undocumented backdoor) in the root-privileged 'assistant' daemon in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 on Android allows a physically-present attacker with USB access to execute arbitrary OS commands as root by sending the hard-coded magic string 'dji26656677' to the USB-gadget serial interface (/dev/ttyGS0), after which each subsequent line is passed to system().
A reflected cross-site scripting vulnerability in the Classic Web Client of Zimbra Collaboration Suite (ZCS) allows an attacker to inject JavaScript through the packages parameter of the /h/rest document editor. The editor inserts package names into script attributes without HTML encoding. When combined with CVE-2026-50053, an attacker with an ordinary Zimbra account can supply their own authentication token and document identifiers in a URL and execute JavaScript in another signed-in user's Zimbra browser session when that user opens the URL. This permits reading mailbox data and performing authenticated actions as the victim. The issue affects ZCS 10.1.16 and was remediated in 10.1.17.
In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix NULL pointer dereference when the 'R' flag is used
If the dm-integrity device has the SB_FLAG_DIRTY_BITMAP flag set and the
user activates the device in the 'R' mode, a crash in dm_integrity_resume
happens because the function attempts to read the journal containing the
bitmap.
This patch makes dm-integrity skip any writes to the device in
dm_integrity_resume if the device is activated in the 'R' mode.
In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: validate the superblock on resume
dm_integrity_resume() re-reads the superblock from the device so that it
picks up the flags and the recalculate position. It performs no
validation on the result, while the constructor validates the superblock
it reads and sizes all the in-memory structures according to it. The user
may modify the superblock on the underlying device while the dm-integrity
device is suspended, so that the two no longer agree.
In particular, access_journal_data() shifts the journal entry index by
ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the
journal page list were computed with the value that was present at
constructor time. Increasing log2_sectors_per_block makes the index run
past the end of the journal, and dm-integrity then writes 512 bytes
through lowmem_page_address(NULL).
Snapshot the validated superblock in the constructor and refuse to resume
if any of the fields that describe the on-disk geometry changed.
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler
A CPU going down has to empty its own rq. Its hotplug thread waits in
sched_cpu_wait_empty() until nothing else is left, and the only thing that
wakes it is balance_push(), which runs from __schedule() on the dying CPU
and pushes off the migratable tasks the CPU picks.
sched_ext breaks this. A task sitting on a user DSQ or held by the BPF
scheduler is still counted on its rq, but an inactive CPU no longer calls
ops.dispatch() and can't pull the task back. The dying CPU goes idle with
the task still counted, and one of two things happens:
- Another CPU consumes the task. The rq empties without a __schedule() on
the dying CPU, so the hotplug thread is never woken and cpu_down() hangs
holding cpu_hotplug_lock.
- The task is affine only to the dying CPU. Nothing can move it, and the
offline stalls until the watchdog ejects the BPF scheduler.
When the rq goes offline, re-enqueue every task on it that isn't already on
the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the
dying CPU itself picks the tasks and balance_push() pushes them off, the
same as for the other sched classes. From then on no sched_ext path on
another CPU can pull a task off the rq.
ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU
hotplug then waits for an RCU grace period before taking the rq offline. A
BPF-held task affine only to the dying CPU and preempted inside an RCU
read-side critical section would block that grace period, and the rq would
never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps
running until the rq goes offline. Only the dying CPU's own hotplug thread
clears the flag during teardown, and task_can_run_on_remote_rq() still keeps
other rqs' tasks off the CPU.
In the Linux kernel, the following vulnerability has been resolved:
readdir: take no inode lock on an immutable directory
iterate_dir() takes the directory's i_rwsem shared and holds it across
->iterate_shared(). For a directory that never has an entry and is
never removed the lock keeps nothing still, it only orders every reader
and every writer of that inode behind each other.
For the directory of a nullfs instance that matters. The instance of
the initial mount namespace is the root of every empty mount namespace
and the private instance is the root of every kernel thread, so one
inode is shared across users who have nothing else in common. And a
reader can hold the lock for as long as it likes: back the getdents()
buffer with a mapping of a file on a FUSE mount of your own, let the
copy of "." and ".." fault and let the server wait. Queue an exclusive
taker behind it, a mkdir() in that directory goes through start_dirop()
before the read-only mount is reported, and from then on every lookup
that misses the dcache in that directory, every create and every mount
on it waits until the server answers. One user of an empty mount
namespace stalls all the others.
Add FOP_IMMUTABLE for the file operations of a directory that never
changes and is never removed and let iterate_dir() skip the lock for
it. The flag never changes for a file, ->f_pos is protected by
f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be
set on such a directory and neither touch_atime() nor fsnotify take
i_rwsem. Set it on the nullfs directory. The placeholder directories of
libfs never have an entry either but their owners remove them, so they
keep the lock.
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix heap out-of-bounds write in krb5_authenticate()
In krb5_authenticate(), out_len is calculated to determine available
headroom in response_buf for the incoming Kerberos AP-REP token. However,
when SMB2_SESSION_SETUP is processed as a non-first element of a compounded
SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off.
This causes out_len to overstate remaining buffer headroom by
the cumulative size of prior responses in the compound chain. Consequently,
the length check in ksmbd_krb5_authenticate()
(*out_len <= resp->spnego_blob_len) passes erroneously, allowing memcpy()
to write the AP-REP blob past the end of response_buf into adjacent kernel
heap memory.
Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len,
ensuring it accurately reflects physical remaining buffer space.
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use active memslots for the per-vCPU MMIO cache
KVM tags the per-vCPU MMIO cache with a memslot generation so that a
memslot update invalidates cached MMIO information. Both the fill and
validation paths use kvm_memslots(), which unconditionally selects address
space 0, even when the vCPU is running in SMM and using address space 1.
Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the
memslot generation to the cache key so that a memslot update could not
leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM
to the MMU role, support SMRAM address space") added the SMM address space,
these helpers were not converted to use the active memslots.
Consequently, an update to the SMM memslots can leave an entry from the old
SMM address space apparently valid after the vCPU returns to the normal
address space. A guest can then cause an access to valid RAM at the same
GFN to be returned to userspace as KVM_EXIT_MMIO.
Completing that exit through the VMM's RAM address space writes the backing
page without going through KVM's write-tracking path. If the page backs a
nested EPT table, KVM can continue using shadow translations derived from
the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault()
catches this invalid cache and memslot combination.
Use the vCPU's active memslots when caching and validating the entry.
Memslot generations are unique across address spaces, so the generation
also distinguishes the normal and SMM views. This matches the MMIO SPTE
cache, which already uses kvm_vcpu_memslots().
On an unpatched current-mainline kernel, a regression test that fills the
cache in SMM and updates only the SMM memslots fails the intended RAM write
and triggers the kvm_mmu_write_protect_fault() warning. With this change,
the same test completes the RAM write without a warning. The x86/smm_test,
set_memory_region_test, and memslot_modification_stress_test selftests also
pass.
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: fix DMA mapping length for padded small packets
Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412
NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces:
DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000
[fault reason 0x06] PTE Read access is not set
bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001
...
NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out
The fault address (0xfc499000) is on an exact 4KB page boundary,
pointing to a DMA read buffer overrun.
In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes),
such as 42-byte untagged ARP frames, are padded:
if (length < BNXT_MIN_PKT_SIZE) {
pad = BNXT_MIN_PKT_SIZE - length;
if (skb_pad(skb, pad))
goto tx_kick_pending;
length = BNXT_MIN_PKT_SIZE;
}
mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE);
...
dma_unmap_len_set(tx_buf, len, len);
However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes)
and is left unadjusted after padding. Consequently, dma_map_single() and
dma_unmap_len_set() map and track only 42 bytes.
Later, the hardware TX buffer descriptor is programmed with the padded length:
txbd->tx_bd_len_flags_type =
cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags |
TX_BD_FLAGS_PACKET_END);
The NIC DMA engine is thus instructed to read 52 bytes from a region where
only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB
page (within 'pad' bytes of the next page), the hardware DMA read overruns
into the unmapped adjacent page, triggering an IOMMU fault.
This issue was exposed after commit 447cbe95ebb9 ("vlan: fix skb_under_panic
and races when toggling HW VLAN offload") because reserving extra VLAN
headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data
offsets and potentially causing small frames to land right against page
boundaries.
Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in
bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled,
because padding might linearize the skb.
This ensures skb->len and skb_headlen(skb) reflect the padded size so
that dma_map_single() maps the full buffer and the descriptor length is
consistent. This also removes the temporary 'pad' variable and masking logic.
The padding is done after the SW USO branch, otherwise
bnxt_sw_udp_gso_xmit() would account the padding as UDP payload
and send it in extra segments.
Note that SW USO segments are still not padded: with IPv4, a segment
carrying less than 10 bytes of UDP payload (small gso_size, or a short
last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE.
This is a separate issue, left for a followup patch.
In the Linux kernel, the following vulnerability has been resolved:
fs: Free any excess xarray nodes in clear_inode()
For many years we've had a hard to hit leak of xarray nodes. Hugh
documented it well in commit 786b31121a2c. Recently people and
syzbot have found ways to force it to happen with madvise. Rather
than fix the leaks where they happen, just call xa_destroy() which
has the side-effect of cycling the i_pages lock.
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent stale XSK buffer release on refill retry
When an XDP redirect to an AF_XDP socket fails because its RX ring is
full, the XSK core frees the buffer. During the subsequent batched refill
of a legacy cyclic RQ, mlx5e also releases the WQE's XSK buffer before
allocating a replacement. If that refill succeeds only partially, a WQE
left without a replacement retains its old buffer pointer.
The buffer can meanwhile be allocated to another WQE. A later refill
retry can then free the live buffer through the stale pointer and publish
the same UMEM frame twice.
Mark the WQE as released immediately after the driver-side free. The flag
is already cleared when a replacement buffer is assigned, so refill
retries no longer release stale pointers.
The failure is silent and produces no kernel warning or splat. A
standalone legacy cyclic-RQ zero-copy libxsk reproducer, using 64-byte UDP
traffic offered at 12 Mpps, detected it: stock stopped after 2,854,914
packets in 4.094 seconds, with 4,542 xdp_rx_ring_full events and 64
ownership/double-publication errors. With this change it processed
356,904,225 packets in 30 seconds despite 571,405 xdp_rx_ring_full events,
with no ownership or data errors.
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent stale XSK buffer release on MPWQE refill retry
With AF_XDP on a striding RQ, mlx5e defers releasing XSK buffers until
an MPWQE is refilled. If XSK allocation then returns -ENOMEM,
actual_wq_head is not advanced and a later NAPI poll retries the same
WQE.
mlx5e_free_rx_mpwqe() leaves each released slot marked as releasable. On
retry it can therefore call xsk_buff_free() again through stale pointers
after the frames have returned to the XSK pool and been reallocated.
Set all skip_release_bitmap bits in the common error path of
mlx5e_xsk_alloc_rx_mpwqe(). This matches mlx5e_alloc_rx_mpwqe(). A
successful allocation already clears the bitmap after replacing every
buffer, so retries become idempotent without changing the success path.
Fault injection forced three consecutive failures for one selected MPWQE.
Both an early allocation failure and a partial 8-of-16-buffer unwind
released the original 16 XSK buffers only once. Each error left a full
bitmap, the following NAPI retry skipped the release, and a later
successful allocation cleared it. A 20-second AF_XDP zero-copy pressure
run exercised 1,575,262 buffer allocation failures without invalid
descriptors, WQE errors, or kernel warnings.
In the Linux kernel, the following vulnerability has been resolved:
ipv4: udp: Create exceptions before socket matching
Currently, when ICMP Fragmentation Needed and Redirect Message packets
are locally delivered and quote a UDP packet, a FIB nexthop exception
(FNHE) is only created if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the FNHE cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()") and commit 67d6d681e15b ("ipv4: make exception cache
less predictible") tried to mitigate such attacks by making it harder
for attackers to discover hash collisions in the FNHE cache and by
randomizing the number of exceptions a hash bucket can hold,
respectively. Unfortunately, both of the mitigations can be bypassed.
Instead, mitigate such attacks by always creating a FNHE, even before
trying to find a matching socket. Do that by calling ipv4_update_pmtu()
and ipv4_redirect(), the helpers used when the quoted packet did not
originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in a FNHE being created or updated in the cache that the
attacker can observe.
Pass an oif of 0, in a similar fashion to icmp_err(). This is also the
oif used by the socket path for sockets that are not bound to a device.
Note that this does not allow attackers to create FNHEs that they could
not create before, as both helpers can already be reached with little to
no validation. For example, by sending an ICMP error that quotes an ICMP
Echo Reply or one that quotes a UDP source port that matches a wildcard
socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ipv4_sk_update_pmtu() /
ipv4_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the FNHE cache of the nexthop resolved by the no socket helpers and
another in the FNHE cache of the nexthop used by the socket.
In the Linux kernel, the following vulnerability has been resolved:
ipv6: udp: Create exceptions before socket matching
Currently, when ICMPv6 Packet Too Big and Redirect Message packets are
locally delivered and quote a UDP packet, an exception is only created
in the IPv6 exception cache if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the exception cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and
commit a00df2caffed ("ipv6: make exception cache less predictible") tried
to mitigate such attacks by making it harder for attackers to discover
hash collisions in the exception cache and by randomizing the number of
exceptions a hash bucket can hold, respectively. Unfortunately, both of
the mitigations can be bypassed.
Instead, mitigate such attacks by always creating an exception, even
before trying to find a matching socket. Do that by calling
ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted
packet did not originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in an exception being created or updated in the cache that
the attacker can observe.
Pass the ifindex of the ingress device and the default uid, in a similar
fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any
nexthop in ip6_redirect_nh_match() and no exception would be created in
response to a Redirect Message.
Note that this does not allow attackers to create exceptions that they
could not create before, as both helpers can already be reached with
little to no validation. For example, by sending an ICMPv6 error that
quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that
matches a wildcard socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ip6_sk_update_pmtu() /
ip6_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the exception cache of the nexthop resolved by the no socket helpers
and another in the exception cache of the nexthop used by the socket.
In the Linux kernel, the following vulnerability has been resolved:
rust_binder: reschedule node refcount update on thread exit
When a thread exits via BINDER_THREAD_EXIT, its pending work items are
cancelled. If a thread exits while holding a pending node refcount
increment (e.g. pushed as deferred work to that thread), the refcount
increment was previously dropped because Node::cancel() and
NodeWrapper::cancel() were no-ops.
Dropping the refcount update leaves the node's delivery state and count
state desynchronized, and userspace will not receive the notification,
which can cause the node to never be freed from the process's nodes tree
when all external references are dropped.
Fix this by implementing DeliverToRead::cancel() for Node and NodeWrapper
to move the pending refcount update to the process's work queue on thread
exit so another thread can deliver it to userspace.
In the Linux kernel, the following vulnerability has been resolved:
ipv4: stop PMTU walk when nexthop group shrinks
Commit 7d3f3b4367f3 ("net: ipv4: Cache pmtu for all packet paths if
multipath enabled") made __ip_rt_update_pmtu() update every path.
For nexthop objects, fib_info_num_path() and fib_info_nhc()
independently load nh->nh_grp. RCU protects each group's lifetime but
does not make the loads observe the same group. If replacement shrinks
the group after the loop accepts an index, fib_info_nhc() returns NULL
and update_or_create_fnhe() dereferences it.
A deterministic probe only widened the existing window between the real
operations. On v7.2, an RTM_NEWNEXTHOP replacement published a
one-member group after the PMTU reader accepted index 1 from a two-member
group, producing:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: update_or_create_fnhe+0x45/0x15b0
Stop when the indexed path is absent. Groups are dense, so no later
index exists in that snapshot. The same real-writer window completed
114,423 PMTU iterations without an oops with this check. A reproducer
is available on request.
Replacement requires CAP_NET_ADMIN in the network namespace. Where
unprivileged user namespaces are permitted, a local user can obtain it
in a new user and network namespace.
In the Linux kernel, the following vulnerability has been resolved:
ipv4: stop exception dump when nexthop group shrinks
Commit 4ce5dc9316de ("inet: switch inet_dump_fib() to RCU
protection") allowed IPv4 FIB dumps to run concurrently with nexthop
replacement.
fib_dump_info_fnhe() uses fib_info_num_path() as the loop bound,
then fib_info_nhc() independently reloads nh->nh_grp. If
RTM_NEWNEXTHOP replaces a group with fewer paths between those loads,
fib_info_nhc() returns NULL and the dump dereferences it through
nhc_flags.
Stop the walk when the indexed path is absent. Nexthop groups are
dense, so the current snapshot has no later path.
In the Linux kernel, the following vulnerability has been resolved:
ipv4: stop route notification sizing when nexthop group shrinks
Commit 680aea08e78c ("net: ipv4: Emit notification when fib
hardware flags are changed") added an RCU-only fib_nlmsg_size() call
for asynchronous hardware flag notifications.
fib_nlmsg_size() checks fib_info_num_path() before each iteration,
then fib_info_nhc() independently reloads nh->nh_grp. If
RTM_NEWNEXTHOP replaces a group with fewer paths between those loads,
fib_info_nhc() returns NULL and fib_nexthop_nlmsg_size() dereferences
it.
Stop sizing when the indexed path is absent. Nexthop groups are
dense, so the current snapshot has no later path.
In the Linux kernel, the following vulnerability has been resolved:
ipv4: do not warn on route notification size race
Commit 680aea08e78c ("net: ipv4: Emit notification when fib hardware
flags are changed") added asynchronous route notifications for hardware
flag changes.
fib_alias_hw_flags_set() sizes the skb with fib_nlmsg_size() and later
fills it with fib_dump_info() while holding only RCU. With nexthop
compatibility mode enabled, a concurrent replacement can grow the group
between these independent snapshots. fib_dump_info() can then
legitimately return -EMSGSIZE, so the warning does not prove a sizing bug.
Remove the warning. The existing error path still frees the skb and
reports the error to listeners.
In the Linux kernel, the following vulnerability has been resolved:
ipv6: do not warn on route notification size race
fib6_info_hw_flags_set() sizes the skb with rt6_nlmsg_size() and later
fills it with rt6_fill_node(). With nexthop compatibility mode enabled,
a concurrent replacement can grow the group between these independent
snapshots. rt6_fill_node() can then legitimately return -EMSGSIZE, so
the warning does not prove a sizing bug.
Remove the warning. The existing error path still frees the skb and
reports the error to listeners.
In the Linux kernel, the following vulnerability has been resolved:
Input: ati_remote2 - fix type confusion in device attribute handlers
Previously, the channel_mask and mode_mask attributes were registered on
the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b
("Input: ati-remote2 - use driver core to instantiate device
attributes") converted the driver to let the driver core manage them via
dev_groups in struct usb_driver, the attributes moved to the bound
usb_interface devices, but the show and store callbacks were not updated
accordingly.
As a result, the callbacks still invoked to_usb_device() on a device
pointer belonging to a struct usb_interface, producing an invalid
usb_device pointer.
Use to_usb_interface() directly in the attribute handlers to obtain the
interface and its driver data.