Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning.
The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset.
The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination.
The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit.
A weakness has been identified in Tenda F6 12.02.01.73. Affected is an unknown function of the component Web Management Interface. Executing a manipulation of the argument ecos_pw can lead to cleartext transmission of sensitive information. The attack may be launched remotely. This attack is characterized by high complexity. The exploitability is told to be difficult. The exploit has been made available to the public and could be used for attacks.
A security flaw has been discovered in Tenda F6 12.02.01.73. This impacts an unknown function of the component Web Management Interface. Performing a manipulation results in cross-site request forgery. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks.
virtualenv is a tool for creating isolated virtual python environments. From 21.14.9 until 21.14.13, the bash bin/activate script can copy an attacker-controlled --prompt value into PS1 without escaping dollar signs or backticks when both promptvars and POSIX mode are disabled during activation. Re-enabling promptvars, running set -o posix, or starting an interactive child bash that inherits the exported PS1 can then expand command substitution in the stored VIRTUAL_ENV_PROMPT value and execute commands as the user who activates the environment. This issue is fixed in version 21.14.13.
pypdf is a free and open-source pure-python PDF library. Prior to 6.21.2, an incomplete remediation for repeated malformed cross-reference entries in GHSA-55h5-xmcq-c37v could still trigger a complete PDF stream reload during each recovery attempt even when a recovery cache was present, causing crafted cross-reference streams to produce long runtimes. This issue is fixed in version 6.21.2.
pypdf is a free and open-source pure-python PDF library. Prior to 6.21.2, an attacker can craft a PDF with a standard cross-reference table whose declared entry count exceeds what the file can contain, causing excessive processing and long runtimes when the file is opened. This issue is fixed in version 6.21.2.
pypdf is a free and open-source pure-python PDF library. Prior to 6.21.2, an attacker can craft a PDF that repeatedly references the same nonexistent indirect object, causing relevant file parts such as pages to trigger repeated full-file recovery loads and long runtimes when accessed. This issue is fixed in version 6.21.2.
A potential security vulnerability has been identified in HP One Agent for certain HP PC products, which might allow for escalation
of privilege and/or arbitrary code execution. HP is releasing software updates to mitigate the potential vulnerability.
An incomplete list of disallowed inputs in the Python code validator of the run_script tool in AWS MCP Server might allow an authenticated remote user to execute arbitrary code within their own isolated session environment via a crafted script.
AWS fixed this issue service-side. No customer action is required.
Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 42.11.16, 43.8.1, 44.9.1, and 45.0.0-beta.6, Electron does not block compromised eMudhra intermediate certificates in Chromium networking, Node.js tls, Node.js https, or Node.js fetch. An attacker who holds a certificate issued through one of these intermediates and can intercept network traffic can impersonate a TLS server to an affected application. This issue is fixed in versions 42.11.16, 43.8.1, 44.9.1, and 45.0.0-beta.6.
Fallow is a codebase intelligence tool for TypeScript and JavaScript. From 2.68.0 until 3.34.0, Fallow follows attacker-controlled Jest projects paths outside the project root through absolute paths, parent segments, dot-prefixed wildcard globs, or symlinks. In version 3.33.1, the same behavior also affects Vitest test.projects paths, Vitest inline-project extends paths, and symlinked script --config paths. Fallow parses the outside files as test-runner configuration and uses them to credit dependencies, setup files, and JSX import sources, which can change unused dependency and unused file findings in CI or agent analysis. The outside file contents are not printed or sent over the network. This issue is fixed in version 3.34.0.
Tandoor Recipes before 2.7.0 contains an improper cache-key design in cookbook/helper/permission_helper.py that allows authenticated users to retain stale group-based permissions across different spaces by exploiting a cache key keyed only on user id while omitting the active space, with the cached entry's TTL refreshed on every request. Attackers can create their own space to obtain an admin group designation, then switch their active space to a victim space where they hold lesser privileges, causing the stale cached admin decision to authorize elevated access and bypass group revocations or demotions across multiple permission classes and views.
ConnMan through 2.0 has a stack-based buffer overflow via a DHCPv6 Reply message. This occurs in get_domains in gdhcp/client.c. It copies a fixed NS_MAXDNAME (1025) bytes from a DHCPv6 DOMAIN_LIST (option 24) value into a 1026-byte stack buffer dns_name regardless of the actual option length, then walks DNS labels with an unbounded "c += jump + 1" loop. A crafted DHCPv6 REPLY with a DOMAIN_LIST option of >= 1025 non-zero bytes makes the label walk leave the buffer and read/write '.' past its end in attacker-chosen strides. An on-link attacker can trigger this without authentication via a forged Router Advertisement (O=1) and a forged DHCPv6 REPLY matching xid/CLIENTID with a long DOMAIN_LIST. The impact is unauthenticated on-link crash of connmand (runs as root). This was introduced in bb06c47.
Server-side request forgery in the model download path in Amazon Web Services Multi Model Server 1.1.11 and earlier might allow remote actors to send requests to internal network destinations via a crafted model URL.
Multi Model Server is end of life and no fixed version is available. Users should discontinue use of Multi Model Server and migrate to a supported model serving solution.
Relative path traversal during model archive extraction in Amazon Web Services Multi Model Server 1.1.11 and earlier might allow remote actors to execute arbitrary code via a crafted model archive.
Multi Model Server is end of life and no fixed version is available. Users should discontinue use of Multi Model Server and migrate to a supported model serving solution.
Tokio is a runtime for writing applications with Rust. In 1.54.0, a race condition between tokio::time::Interval::poll_tick (including .tick().await) and the multi-threaded runtime's time driver could drop an internal timer entry without synchronizing with the driver thread that was firing it. The race caused a use-after-free on the timer's waker and task state in safe Rust, which could produce assertion panics, task reference-count corruption, or heap memory corruption. This issue is fixed in 1.54.1.
A flaw was found in Kruize Autotune. Its REST API ships without an authentication layer, and the endpoints that return datasource configuration — the list-datasources endpoint (GET /datasources) and the datasource-metadata endpoint — serialized datasource objects using a default Gson configuration with no field-exclusion strategy. As a result, the authentication secrets stored for each configured monitoring datasource (basic-auth passwords, bearer tokens, API keys, and OAuth2 client secrets) were returned in cleartext to any client able to reach the service. An attacker with network access to Autotune could harvest these credentials and reuse them to authenticate to the backing monitoring stack.
Tandoor Recipes before 2.7.0 contains a server-side request forgery vulnerability in the Pestle importer that allows authenticated low-privileged users to force the server to issue GET requests to arbitrary internal or external hosts by crafting a malicious image URL in a Pestle JSON import file. Attackers can exploit the raw requests.get call in cookbook/integration/pestle.py, which bypasses the application's centralized requests-hardened SSRF filter, to reach internal-only endpoints, perform port/service discovery, and exfiltrate internal responses via the stored recipe image.
A flaw in Node.js `crypto` causes the internal entropy caches used by `crypto.randomUUID()`, `crypto.randomUUIDv7()`, and `crypto.randomInt()` to be saved into user-land startup snapshots (`--build-snapshot`) and single executable applications built with `useSnapshot`.
If any of these functions, or an API that relies on them such as `URL.createObjectURL()`, is called while the snapshot is built, every process started from that snapshot returns the same values until the cache is refilled: up to 127 UUIDs and about 1,000 `randomInt()` values. Identifiers expected to be unique can collide across processes, and values issued by one process can be predicted by observing another.
This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.
A flaw in Node.js Permission Model filesystem enforcement leaves `fs.realpathSync()` without the required read permission checks. This is an incomplete fix of CVE-2026-21715, which only covered `fs.realpathSync.native()`.
As a result, code running under `--permission` with restricted `--allow-fs-read` can still use `fs.realpathSync()` to check file existence, resolve symlink targets, and enumerate filesystem paths outside of permitted directories.
This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.
A flaw in Node.js TLS hostname verification allows a certificate with only a DNS SAN to authenticate an IP endpoint when the client connects using a non-canonical IPv4 spelling, such as `0177.0.0.1`, `0x7f.0.0.1`, `2130706433` or `127.1`.
`tls.checkServerIdentity()` did not classify these hosts as IP addresses, but normalized them to their canonical form and matched the result against the certificate DNS names. A certificate containing `DNS:127.0.0.1` and no `IP Address:127.0.0.1` SAN was therefore accepted, while the same certificate is correctly rejected for `127.0.0.1`. Exploitation requires a certificate with a numeric DNS SAN issued by a CA trusted by the client, and a platform resolver that accepts these spellings, such as glibc.
This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.
A flaw in Node.js Permission Model filesystem enforcement can grant access to paths that do not match a wildcard `--allow-fs-read` or `--allow-fs-write` rule.
When the requested path is shorter than the prefix of a wildcard grant, the radix tree lookup stops comparing early and treats the path as a match. For example, `--allow-fs-read=/etc/passwd.*` also allows reading `/etc/passwd`. This requires the wildcard grant to sit directly under the root of the permission tree, for example when it is the only grant for that scope. This is a different root cause from CVE-2026-58043.
This vulnerability affects Node.js **26.x**.
A flaw in the Node.js `zlib.ZipFile` API can cause it to return bytes that do not belong to the requested entry after the local and central header validation fails.
When `zipEntry.modified` is read on an archive whose local header does not match its central directory, either directly or while compacting the archive, the validation error is caught but the parsed local header is left cached without a content offset. A later content read then returns attacker-controlled bytes from the start of the file instead of rejecting the archive, and CRC-32 verification still passes because the attacker controls the central directory CRC. A Node.js-based scanner can therefore approve different content from what another ZIP implementation extracts from the same archive.
This vulnerability affects Node.js **26.x**.
A flaw in Node.js TLS hostname verification can cause a server certificate to be validated against a different IP address than the one the client connected to, when the host is a non-canonical IPv4 literal with a leading zero, such as `0127.0.0.1`.
`tls.checkServerIdentity()` normalizes the host following the WHATWG URL rules, which read a leading-zero octet as octal (`0127.0.0.1` becomes `87.0.0.1`), while the connection is made through the operating system resolver, which on some platforms such as macOS reads it as decimal (`127.0.0.1`). A server at the connected address can then be authenticated with a certificate issued for another IP address.
This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.
A flaw in Node.js TLS hostname verification allows a certificate without a matching IP address SAN to authenticate a connection to an IPv4 address when the host is written with non-ASCII characters, such as fullwidth digits (`１２７.0.0.1`).
`tls.checkServerIdentity()` did not recognize such hosts as IP addresses, even though they normalize and resolve to a regular IPv4 address, and matched them against the certificate DNS names and Common Name instead. A certificate containing `DNS:127.0.0.1` or `DNS:*.0.0.1` could therefore be accepted for an IP endpoint it was not issued for. This is a regression introduced after the fix for CVE-2026-48618.
This vulnerability affects Node.js **26.x** and **24.x**.
A flaw in Node.js DNS resolution allows hostnames containing a NUL byte to be silently truncated by the dns.resolve*() functions and dns.reverse(). This is an incomplete fix of CVE-2026-48930, which only covered dns.lookup() and the net/tls host options.
Because the name is passed to c-ares as a C string, resolving attacker.example\0.trusted.example queries attacker.example and returns its records without any error. Applications that validate a hostname, for example against a domain allowlist, and then resolve it with dns.resolve*() can act on records for a different name than the one they validated.
This vulnerability affects Node.js 26.x, 24.x, and 22.x.
A flaw in Node.js HTTP Agent connection reuse can cause a client to accept as valid a response that was sent before the client has sent the request. This is an incomplete fix of CVE-2026-48931.
The guard that destroys idle keep-alive sockets when unexpected data arrives only runs when the event loop polls for I/O. If an unsolicited response has already reached the socket but has not been read yet when the socket is handed to a new request, for example because the event loop was busy with synchronous work, the guard is removed without seeing it and the data is parsed as the response to the new request.
This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.
Hugging Face Datasets through 5.1.0 contains an insecure deserialization vulnerability that allows attackers to execute arbitrary Python code by crafting a malicious pickle file loaded through the deprecated pandas packaged builder. Attackers can supply a pickle-backed dataset that is processed by Pandas._generate_tables via pandas.read_pickle() without validation, so when a victim calls datasets.load_dataset("pandas", data_files=...), the embedded __reduce__ payload executes code with the victim process's privileges.
An OS command injection vulnerability in the /htdocs/web/diagnostic.php endpoint of D-Link DAP1160L A1_FW101WWb04 allows attackers to execute arbitrary commands via injecting arbitrary shell metacharacters.
e-SIC Livre (esiclivre) v0.2.2 and earlier contains an uncontrolled resource consumption vulnerability in restrito/inc/captcha.php. The application uses user-supplied parameters (l, a, tf, ql) without validation to generate CAPTCHA images, allowing remote attackers to cause denial of service via excessive memory and CPU consumption.
Uni-CLI gives people and agents one command interface for websites, browsers, desktop applications, local tools, and MCP. Prior to version 0.225.2, Uni-CLI exposed the legacy JSON-RPC-over-HTTP MCP transport on loopback without validating browser Origin headers before routing requests. A malicious web page could send a CORS simple POST request, such as text/plain, to the local /mcp endpoint and deliver a JSON-RPC body to the dispatcher. If the user had started the local MCP HTTP transport, that page could drive tools/call requests against the user's local Uni-CLI server. The Streamable HTTP transport already enforced this browser-to-localhost boundary. The legacy stateless HTTP path did not, so the two HTTP transports had drifted. This issue is about the browser-to-localhost boundary; it does not change Uni-CLI's local-code-execution trust model. This issue has been patched in version 0.225.2.
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 25.08 to before version 26.05, the IIIF Auth 2.0 endpoints auth/login and auth/token in AuthorizationFlowResource accept an origin query parameter without validation and then (1) embed it into the Content-Security-Policy: frame-ancestors response header and (2) embed it into an HTML response body as a JavaScript single-quoted postMessage argument. Because the attacker controls both the login and token calls that initiate the flow, the unescaped value yields reflected XSS. This issue has been patched in version 26.05.
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 22.04 to before version 26.05, the unauthenticated REST endpoint GET /api/v1/index/{solrField}/spatial/search concatenates the user-supplied region query parameter directly into a Solr query string with no escaping, no local-param stripping, and no runtime schema enforcement (the OpenAPI @Schema(pattern=...) annotation is documentation-only at the JAX-RS layer). An attacker can inject Solr local-param syntax ({!parent ...}, {!join ...}) and boolean operators to make access-restricted georeferenced records match the query, bypassing the access-condition filter. This issue has been patched in version 26.05.
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 4.11.0 to before version 26.05, several Jakarta WebSocket endpoints in goobi-viewer-core (DownloadTaskEndpoint, CampaignEndpoint, AutocompleteEndpoint, UserEndpoint) accept connections without verifying that the associated HttpSession belongs to a logged-in user, and none validate the Origin header against an allowlist. An unauthenticated attacker can therefore connect to these endpoints; through CampaignEndpoint this allows polluting the in-process crowdsourcing page-lock map and broadcasting forged lock messages, disrupting reviewers' work. This issue has been patched in version 26.05.
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 25.01 to before version 26.05, AuthenticationEndpoint.verifyOpenIdToken builds its verifier as JWT.require(algorithm).withIssuer(issuer).build() and does not enforce the aud claim during cryptographic validation. The aud check is performed manually afterwards via a single string-equality call, which only handles single-string aud values. In a multi-RP IdP setup, a token whose single-string aud matches the viewer's client ID but was issued for a different relying party passes the check and authenticates the attacker as the token's sub. This issue has been patched in version 26.05.
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, Configuration.getWebApiToken returns the empty string when webapi.authorization.token is not configured. AuthorizationFilter compares the supplied token against this default without first checking that the configured token is non-empty. A request to any @AuthorizationBinding-protected endpoint with an empty ?token= value is therefore accepted. This issue has been patched in version 26.05.
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, the legacy RSS servlet (RssResolver, GET /rss/) accepts the q and filterQuery parameters and concatenates them into Solr queries without validation. The servlet predates the REST API layer and lacks the input validation present in GET /api/v1/records/rss. q forms the main query body (wrapped only in literal parentheses); filterQuery is passed directly as a Solr fq. An unauthenticated attacker can inject Solr boolean operators to break out of the wrapping and render the trailing access-condition filter-query suffix optional, so that access-restricted records are included in the generated RSS feed. The q and filterQuery parameters are the same underlying vulnerability in the same servlet; q (the main query body) has the broader scope. This issue has been patched in version 26.05.
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 23.03 to before version 26.05, SolrTools.cleanUpQuery() strips Solr local-parameter syntax ({!...}) from user-supplied query strings before they reach Solr. Its regex can be bypassed by wrapping the local parameter in a second pair of curly braces ({{!...}}): the outer braces are stripped, the inner {!...} survives intact, and a valid Solr local parameter is forwarded. The flaw is in the shared sanitizer, so it affects any endpoint that routes user input through cleanUpQuery. The double-brace bypass applies from v23.10 (the greedy \{(.+)\} regex); a related bare-!join rewrap path is present. This issue has been patched in version 26.05.
Isar is an integration system for automated root filesystem generation. In versions 0.11 and newer, /etc/apt/trusted.gpg.d is created manually during bootstrap setup to be able to deploy local keys. By that, the directory is owned by the calling user (the one that executes Isar) instead of root. If the calling user's id is identical to one of an unprivileged user inside the image, this user is able to alter existing keys and deploy new ones, silently breaking the apt repo integrity protection. The issue is has no impact on those images that use an immutable rootfs, or if apt is never invoked. Changing only the keys does not trigger an exploit, it's just one step in a chain. An attacker would also have to manipulate a remote repo or intercept non-secure communication with it. This issue has been patched via commit 29e84ed.
Kitodo.Production is a workflow management tool for mass digitization and is part of the Kitodo Digital Library Suite. Prior to version 3.9.2, org.kitodo.production.helper.XMLUtils exposes several XML parsing helpers that construct a JAXP parser with the default, non-secure configuration. The methods parseXMLString(String), getNumberOfEADElements(String, String) and checkIfXmlIsWellFormed(String) build a DocumentBuilderFactory / XMLInputFactory / SAXParserFactory via newInstance() and parse the attacker-supplied string without disabling DOCTYPE declarations or external entity resolution. These helpers sit directly on the EAD-import path: an authenticated user who uploads an EAD/XML file through the "Create process" file-upload dialog has the uploaded bytes parsed by these methods. A crafted document with an external entity therefore yields XML External Entity (XXE) injection: local file disclosure and outbound SSRF requests from the server. This issue has been patched in version 3.9.2.
Conda Organization Infrastructure is a centralized location for infrastructure codes. Prior to commit 9c0f238, a GitHub Actions Pwn Request vulnerability appears to remain present in conda/conda. The affected workflow is .github/workflows/update.yml. It is triggered by issue_comment events containing @conda-bot render or @conda-bot recreate. For the render path, the workflow obtains the pull request head repository and branch from the PR API, checks out that PR-controlled repository/ref using secrets.SYNC_TOKEN, and then runs conda/actions/template-files@7f6830b1428a9bd47f0b068892c77eae95207037. The external template-files action reads its default configuration and templates from the checked-out working directory. In the confirmed finding, that action uses an unsandboxed Jinja2 environment to render attacker-controlled template content. This creates a Pwn Request chain in which an untrusted PR/comment path can reach template rendering in a privileged token context. This issue has been patched via commit 9c0f238.
Cacti is an open source performance and fault management framework. Prior to version 1.2.31, a User Enumeration vulnerability allows an attacker to identify valid usernames on the Cacti service. When a user attempts to log in, the application returns slightly different error messages depending on whether the provided username exists in the system. When username exists on Cacti, in the response, they see Access Denied! Login failed. When it does not exist on Cacti, they see Access Denied! Login Failed. The only difference between the responses is the capitalization of the letter "f" in the word failed. This issue has been patched in version 1.2.31.
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 24.03 to before version 26.05, ExternalFilesDownloader.getFilename() extracts the destination filename from a server-supplied Content-Disposition response header and passes it directly to Path.resolve() without stripping directory components. This allows for a malicious HTTP server that the viewer fetches from to supply an absolute path or ../ traversal sequences as the filename, writing attacker-controlled content to an arbitrary path writable by the Tomcat process. When targeting the deployed web-application directory, this yields remote code execution as the tomcat OS user. This issue has been patched in version 26.05.
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 24.03 to before version 26.05, the DownloadTaskEndpoint WebSocket endpoint (/tasks/download/monitor.socket) in goobi-viewer-core accepts download requests from unauthenticated users. This issue has been patched in version 26.05.
Cacti is an open source performance and fault management framework. From version 1.2.27 to before version 1.2.31, Cacti contains an authenticated stored second-order SQL injection in the automation tree rule item handler. A user holding the Automation realm (default General Administration role) can persist an arbitrary SQL fragment in the automation_tree_rule_items.field column. The fragment is later concatenated directly into a SELECT ... AS source FROM ... clause in lib/api_automation.php :: create_all_header_nodes() and executed when an administrator triggers automation via the standard graphs.php?action=actions&drp_action=8 ("Apply Automation Rules") bulk action. The result of the injected SELECT is written into graph_tree_items.title and rendered in the Cacti tree UI, providing a direct exfiltration channe. This issue has been patched in version 1.2.31.
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, when a password reset link is visited, the application generates a replacement password in a predictable way and emails it to the account holder. The insufficient entropy allows the password to be brute-forced by an attacker who can approximate the server-side generation time. Exploiting this finding in isolation requires the victim to have triggered the reset themselves and the attacker to infer the server time from network or email metadata. This issue has been patched in version 26.05.
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, the password reset token is predictably based on the time of the reset request. An attacker who knows the target's email address can request a reset and then brute-force the token. Exploiting this finding alone forces an unauthorized password reset on any account. This issue has been patched in version 26.05.
Cacti is an open source performance and fault management framework. Prior to version 1.2.31, the prior blocklist ([;&| `$\\n\r]) omitted single-quote, double-quote, redirect operators, subshell parens and braces. An authenticated admin could save an input_string` containing single-quote, redirect operator, or subshell parens, and pass the check. This issue has been patched in version 1.2.31.