In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Prevent rereg_mr for non-mem regions
When a QP/CQ/SRQ is created, a two step process is used
where the buffer is allocated in userspace and explicitly
registered with the normal reg_mr mechanism prior to creating
the actual QP/CQ/SRQ object.
These special registrations are indicated via an ABI field
so the driver knows that they do not have a valid mkey and
to skip the actual CQP command submission.
Since these are real MR objects from the core's perspective,
it is possible for a user application to invoke rereg_mr on them
and cause a real CQP op to be emitted with the zero-initialized
mkey value of 0.
Fix this by preventing rereg_mr on these special regions.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Prevent user-triggered null deref on QP create
Previously, the user QP creation path would only attempt to
populate iwqp->iwpbl if the user-provided req.user_wqe_bufs
field was non-zero. The problem is that iwqp->iwpbl is
unconditionally dereferenced later on in irdma_setup_virt_qp.
While there was a check for iwqp->iwpbl != NULL, this check
would only occur if req.user_wqe_bufs was non-zero. The end
result is that a user could send a zero user_wqe_bufs value
and trigger a null ptr deref.
Fix this by unconditionally calling irdma_get_pbl and bailing
if it fails, similar to the CQ and SRQ paths.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: publish QP after initialization
siw_create_qp() currently calls siw_qp_add() before the queues, CQ
pointers, state, completion, and device list entry are ready. A QPN
lookup can therefore reach a QP that is still being constructed.
Move siw_qp_add() to the end of siw_create_qp(), after QP
initialization and before adding the QP to the siw device list.
In the Linux kernel, the following vulnerability has been resolved:
mtd: fix double free and WARN_ON in add_mtd_device() error paths
When device_register() or mtd_nvmem_add() fails inside
add_mtd_device() for a partition, the error handling triggers
mtd_release() via put_device() or device_unregister(). mtd_release()
calls release_mtd_partition() which frees the mtd_info structure.
However, callers such as mtd_add_partition() and add_mtd_partitions()
also call free_partition() in their error paths, resulting in a double
free.
Additionally, release_mtd_partition() hits WARN_ON(!list_empty(
&mtd->part.node)) because the partition node is still linked in the
parent's partitions list when the release callback fires from the
add_mtd_device() error path.
Fix this by overriding dev->type and dev->release before put_device()
in the error paths, so that device_release() invokes a no-op function
instead of mtd_release(). For the mtd_nvmem_add() failure case,
device_unregister() is replaced with device_del() to separate the
device removal from the final kobject reference drop, allowing the
override to take effect before put_device() is called.
The callers' error paths (list_del + free_partition) remain the sole
owners of mtd_info lifetime on add_mtd_device() failure, which is the
expected contract.
The normal partition teardown path is not affected: del_mtd_device()
goes through kref_put() -> mtd_device_release() -> device_unregister()
with dev->type still set to &mtd_devtype, so mtd_release() ->
release_mtd_partition() continues to work correctly for the regular
removal case.
In the Linux kernel, the following vulnerability has been resolved:
xfrm: clear mode callbacks after failed mode setup
xfrm_state_gc_task can run long after a failed IPTFS state setup. In the
reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup
returned -ENOMEM before publishing mode_data, and the temporary module
reference from xfrm_get_mode_cbs() was dropped immediately. The dead state
then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been
unloaded.
Clear x->mode_cbs when mode init or clone fails before publishing
mode_data. Those states never installed mode-specific state or the
long-term IPTFS module pin, so deferred GC has nothing mode-specific to
destroy and must not retain a callback table pointer past the temporary
lookup reference.
The buggy scenario involves two paths, with each column showing the order
within that path:
failed setup path:
1. cache x->mode_cbs
2. mode setup fails before mode_data
3. drop the temporary module ref
4. dead state keeps x->mode_cbs cached
GC/unload path:
1. xfrm_state_put() queues GC work
2. xfrm_iptfs unloads later
3. xfrm_state_gc_task runs
4. GC dereferences stale x->mode_cbs
This also covers the failed clone path where clone_state() returns before
publishing mode_data.
Validation reproduced this kernel report:
Kernel panic - not syncing: Fatal exception
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
failslab_stacktrace_filter matched xfrm_iptfs frames
ack_error=-12
FAULT_INJECTION: forcing a failure
BUG: unable to handle page fault
Workqueue: events xfrm_state_gc_task
RIP: xfrm_state_gc_task+0x142/0x650
Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs]
Kernel panic - not syncing: Fatal exception
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel sched scan results work on unregister
cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a
driver result notification while a scheduled scan request is present. The
work callback recovers the containing cfg80211_registered_device and then
locks the wiphy and walks the scheduled-scan request list.
wiphy_unregister() already makes the wiphy unreachable and drains rdev work
items before cfg80211_dev_free() can release the object, but it does not
drain sched_scan_res_wk. A queued or running result work item can therefore
cross the unregister/free boundary and access freed rdev state.
The buggy scenario involves two paths, with each column showing the order
within that path:
scheduled-scan result path: unregister/free path:
1. cfg80211_sched_scan_results() 1. interface teardown stops and
queues rdev->sched_scan_res_wk. removes the scheduled scan request.
2. cfg80211_wq starts the work 2. wiphy_unregister() drains other
item and recovers rdev. rdev work items.
3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and
and walks rdev state. frees rdev.
Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdev
work items. cancel_work_sync() removes a pending result notification and
waits for an already running callback, so cfg80211_dev_free() cannot free
rdev while this work item is still active.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530
Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211]
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
cfg80211_sched_scan_results_wk+0x4a6/0x530
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x224/0x430
kasan_report+0xac/0xe0
lockdep_hardirqs_on_prepare+0xea/0x1a0
process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212)
lock_is_held_type+0x8f/0x100
worker_thread+0x5ad/0xfd0
__kthread_parkme+0xc6/0x200
kthread+0x31e/0x410
trace_hardirqs_on+0x1a/0x170
ret_from_fork+0x576/0x810
__switch_to+0x57e/0xe20
__switch_to_asm+0x33/0x70
ret_from_fork_asm+0x1a/0x30
In the Linux kernel, the following vulnerability has been resolved:
wifi: ipw2100: fix potential memory leak in ipw2100_pci_init_one()
The memory allocated in the ipw2100_alloc_device() function is not freed
in some of the error paths in ipw2100_pci_init_one(). Fix that by
converting the direct return into a goto to the error path return.
The error path when pci_enable_device() fails cannot jump to fail, since
at this point priv is not set, so perform error handling inline.
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan()
If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks.
Use the existing error handling path to fix it.
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: clamp virtio RX length before skb_put
hwsim_virtio_rx_work() passes the virtqueue used-ring length reported by
the device straight to skb_put() on a fixed-size receive skb. A backend
reporting a length larger than the skb tailroom drives skb_put() past the
buffer end and hits skb_over_panic() -- a host-triggerable guest panic
(denial of service).
Clamp the length to the skb's available room before skb_put(). A
conforming device never reports more than the posted buffer size, so valid
frames are unaffected; a truncated over-report then fails the
length/header checks in hwsim_virtio_handle_cmd() and is dropped, so
truncating rather than dropping here cannot be turned into a parsing
problem.
In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix memory leak in helper_firmware_cb()
helper_firmware_cb() neglects to free the single-stage firmware image
after a successful async load, leading to a memory leak in the USB
firmware-download path.
Fix this memory leak by calling release_firmware() immediately after
lbs_fw_loaded() returns.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
the current wireless tree.
An x86_64 allyesconfig build showed no new warnings. As we do not have
compatible Libertas USB hardware for exercising this firmware-download
path, no runtime testing was able to be performed.
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: defer link RX stats percpu free to RCU
sta_remove_link() frees a removed MLO link's RX stats percpu buffer right
away, but defers only the link container to RCU:
sta_info_free_link(&alloc->info);
kfree_rcu(alloc, rcu_head);
The RX fast path reads link_sta under rcu_read_lock and writes the percpu
stats. A reader that resolved link_sta before the removal keeps the
pointer. The container stays alive from the kfree_rcu, so the read still
works. But the percpu block it points to is already freed. This needs
uses_rss. That is when pcpu_rx_stats exists.
The full STA teardown frees the deflink stats only after
synchronize_net(). The link removal path had no such barrier. The race is
hard to win in practice, but the free should still wait for RCU.
Free the link together with its data from a single RCU callback, so the
percpu block is reclaimed only after readers drain.
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock
When a netlink socket that owns a PMSR session is closed,
cfg80211_release_pmsr() clears the request's nl_portid and queues
pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously.
If the interface tears down concurrently, cfg80211_pmsr_wdev_down()
is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk)
to wait for any running work. The work function acquires wiphy_lock
via guard(wiphy) before calling process_abort.
This is a deadlock: wdev_down holds wiphy_lock and blocks inside
cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same
wiphy_lock. Neither thread can proceed.
The same deadlock is reachable from cfg80211_leave_locked(), which
calls cfg80211_pmsr_wdev_down() for all interface types under
wiphy_lock.
Fix this by converting pmsr_free_wk from a plain work_struct to a
wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running
work items, so the explicit guard(wiphy) in the work function is no
longer needed. wiphy_work_cancel() can be called safely while holding
wiphy_lock - since wiphy_lock prevents the work from running
concurrently, wiphy_work_cancel() never blocks, eliminating the
deadlock.
Remove the cancel_work_sync() for pmsr_free_wk from the
NETDEV_GOING_DOWN handler. cfg80211_leave(), called unconditionally
just before it, already cancels any pending work under wiphy_lock
via wiphy_work_cancel() inside cfg80211_pmsr_wdev_down().
In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: free RNR data on MBSSID mismatch
nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR
entries than MBSSID entries.
The rejected RNR allocation has not been attached to the beacon data yet,
so free it before returning the error.
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate PMSR FTM preamble range
PMSR FTM request parsing accepts preamble values outside the
enumerated nl80211 preamble range.
Reject out-of-range values before using them in the parser capability
bit test using the policy.
[drop unnecessary check]
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: free AP_VLAN bc_buf SKBs outside IRQ lock
ieee80211_do_stop() removes AP_VLAN packets from the parent AP
ps->bc_buf while holding ps->bc_buf.lock with IRQs disabled. It then
calls ieee80211_free_txskb() before dropping the lock.
ieee80211_free_txskb() is not just a passive SKB release. For SKBs with
TX status state it can report a dropped frame through cfg80211/nl80211,
and that path can reach netlink tap transmit. This is the same reason
the pending queue cleanup in ieee80211_do_stop() already unlinks SKBs
under the queue lock and frees them after IRQ state is restored.
The buggy scenario involves two paths, with each column showing the
order within that path:
AP_VLAN management TX: AP_VLAN stop:
1. attach ACK-status state 1. clear the running state
2. queue a multicast SKB on 2. take ps->bc_buf.lock with IRQs
parent ps->bc_buf disabled
3. unlink the AP_VLAN SKB
4. call ieee80211_free_txskb()
Unlink matching AP_VLAN SKBs from ps->bc_buf under the existing lock,
but move them to a local free queue. Drop the lock and restore IRQ state
before calling ieee80211_free_txskb().
WARNING: kernel/softirq.c:430 at __local_bh_enable_ip
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: use wiphy work for socket owner autodisconnect
nl80211_netlink_notify() walks the cfg80211 wireless device list when a
NETLINK_GENERIC socket is released. If the socket owns a connection, the
notifier queues the embedded wdev->disconnect_wk work item.
That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a
NETLINK_URELEASE notifier that already observed conn_owner_nlportid can
queue it after that cancel returns. _cfg80211_unregister_wdev() then
removes the wdev from the list and waits for RCU readers, but
synchronize_net() does not drain work queued by such a reader.
Make the autodisconnect work a wiphy_work instead. The callback already
needs the wiphy mutex, and wiphy_work runs under that mutex. This lets
teardown cancel pending autodisconnect work while holding the mutex,
without a cancel_work_sync() vs. worker locking concern.
Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any
NETLINK_URELEASE notifier that had already reached the wdev list has then
either queued the work and it is removed, or can no longer find the wdev.
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: initialize SDIO data work before cleanup
brcmf_sdio_probe() stores the newly allocated bus in sdiodev->bus before
allocating the ordered workqueue. If that allocation fails, the function
jumps to fail and calls brcmf_sdio_remove().
brcmf_sdio_remove() unconditionally cancels bus->datawork. Initialize the
work item before the first failure path that can reach brcmf_sdio_remove(),
so the cleanup path always observes a valid work object.
This issue was found by our static analysis tool and then confirmed by
manual review of the probe error path and the remove-time work drain. The
problem pattern is an early setup failure that reaches a cleanup helper
which cancels an embedded work item before its initializer has run.
A QEMU PoC forced alloc_ordered_workqueue() to fail at the same point in
brcmf_sdio_probe(), before INIT_WORK(&bus->datawork) is reached. The
resulting fail path calls brcmf_sdio_remove(), and DEBUG_OBJECTS reports
the invalid work drain with brcmf_sdio_probe() and brcmf_sdio_remove() in
the stack.
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: bound element ID read when checking non-inheritance
cfg80211_is_element_inherited() reads the first data octet of the
candidate element (id = elem->data[0]) to look it up in an extension
non-inheritance list. It does so after testing elem->id, but without
verifying that the element actually has a data octet. A zero-length
extension element (WLAN_EID_EXTENSION with length 0) therefore makes it
read one octet past the end of the element.
_ieee802_11_parse_elems_full() runs this check for every element of a
frame once a non-inheritance context exists -- e.g. while parsing a
per-STA profile of a Multi-Link element in a (re)association response,
or a non-transmitted BSS profile -- so a crafted frame from an AP can
trigger a one-octet slab-out-of-bounds read during element parsing:
BUG: KASAN: slab-out-of-bounds in cfg80211_is_element_inherited
Read of size 1 ... in net/wireless/scan.c
Return early (treat the element as inherited) when an extension element
carries no data, mirroring the existing handling of empty ID lists.
The bug was found by fuzzing ieee802_11_parse_elems_full() under KASAN.
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix out-of-bound writes in ffa_setup_and_transmit()
Sashiko (locally) reports multiple out-of-bound issues in
ffa_setup_and_transmit:
1) Writing ep_mem_access->reserved can write out of bounds for FFA
versions < 1.2 as ffa_emad_size_get() returns 16 bytes in that case
while reserved has an offset of 24.
Instead of zeroing fields, memset the struct to zero first based on
the FFA version.
2) Make sure there is enough size to write constituents.
While at it, convert the only sizeof() in the driver that uses a
type instead of variable.
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix Endpoint Memory Access Descriptor offset calculation
Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint
memory access array and to comply with the FF-A spec instead of defaulting
to `sizeof(struct ffa_mem_region)`.
This requires moving `ffa_mem_region_additional_setup()` earlier in the setup
flow.
Also, add sanity checks to ensure the calculated descriptor offsets do not
exceed `max_fragsize`.
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF in sock clone early bailouts
Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage
before bailouts that access it"), sk_clone() performs an initial
shallow copy of the socket field ->sk_bpf_storage via sock_copy()
for the cloned socket newsk.
If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior
to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points
to the parent socket's BPF local storage. When newsk is subsequently
freed via sk_free(), the deallocation path (__sk_destruct() ->
bpf_sk_storage_free()) destroys the parent socket's BPF local storage,
leading to a use-after-free (UAF) on the parent socket.
Fix this by resetting newsk->sk_bpf_storage to NULL immediately after
sock_copy() in sk_clone(), and remove the now redundant initialization
from bpf_sk_storage_clone().
In the Linux kernel, the following vulnerability has been resolved:
ppp: defer channel free to an RCU grace period to fix pppol2tp RX UAF
pppol2tp_recv() runs in the L2TP UDP-encap softirq RX path:
l2tp_udp_encap_recv() -> l2tp_recv_common() -> pppol2tp_recv()
-> ppp_input(&po->chan)
It runs under rcu_read_lock() holding only an l2tp_session reference and
takes NO reference on the internal PPP channel (struct channel,
chan->ppp) that ppp_input() dereferences.
The pppox socket is SOCK_RCU_FREE, so 'po' and the embedded ppp_channel
are RCU-safe. But the internal struct channel is a separate allocation
that ppp_release_channel() frees with a plain kfree():
close(data socket) -> pppol2tp_release() -> pppox_unbind_sock()
-> ppp_unregister_channel() -> ppp_release_channel() -> kfree(pch)
For a channel that is bound (PPPIOCGCHAN) but not attached to a ppp unit
(no PPPIOCCONNECT, pch->ppp == NULL) and not bridged, teardown skips
both ppp_disconnect_channel()'s synchronize_net() and
ppp_unbridge_channels()'s synchronize_rcu(), so the kfree() has no grace
period. rcu_read_lock() in pppol2tp_recv() does not protect against a
plain kfree(), so an in-flight ppp_input() on one CPU can dereference
the channel just freed by close() on another CPU.
The bug is reachable by an unprivileged user.
Defer the channel free to an RCU callback via call_rcu() so the grace
period fences any in-flight ppp_input(). The disconnect and unbridge
teardown paths already fence with synchronize_net()/synchronize_rcu();
call_rcu() does the same here without stalling the close() path.
In the Linux kernel, the following vulnerability has been resolved:
net/iucv: take a reference on the socket found in afiucv_hs_rcv()
afiucv_hs_rcv() looks up the destination socket under iucv_sk_list.lock,
drops the lock, and then passes the socket to the afiucv_hs_callback_*()
handlers without holding a reference. AF_IUCV sockets are not
RCU-protected and are freed synchronously by iucv_sock_kill() ->
sock_put(), so a concurrent close can free the socket in the window
between read_unlock() and the handler, which then dereferences freed
memory (for example sk->sk_data_ready() in afiucv_hs_callback_syn()).
Take a reference with sock_hold() while the socket is still on the list
and release it with sock_put() once the handler has run.
In the Linux kernel, the following vulnerability has been resolved:
scsi: core: wake eh reliably when using scsi_schedule_eh
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers.
In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered
sata_dwc_enable_interrupts() is called before platform_get_irq() and
ata_host_activate(), leaving the SATA controller's interrupt mask
enabled without a registered handler. If a later step fails (irq
request, phy init, etc.) or if the controller asserts an interrupt
during probe, the irq line may fire with no handler, causing a
spurious interrupt storm.
Move sata_dwc_enable_interrupts() after ata_host_activate() so that
interrupts are only unmasked once the handler is registered and the
core is fully initialized.
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: revalidate LOAD_CONN_PARAM queued update
MGMT_OP_LOAD_CONN_PARAM queues conn_update_sync() when a single parameter
update changes an existing LE central connection. The queued work currently
stores a borrowed hci_conn_params entry from hdev->le_conn_params. A later
LOAD_CONN_PARAM request can clear disabled parameters and free that entry
before hci_cmd_sync_work() runs the queued callback.
Do not keep the borrowed hci_conn_params pointer in queued work. Queue the
hci_conn instead and hold a reference until the queued callback completes.
When the work runs, revalidate that the connection is still present, look
up the current hci_conn_params entry, and cancel the update if userspace
removed that entry while the work was pending.
Copy the interval values from the current params entry under hdev->lock,
then drop the lock and keep using hci_le_conn_update_sync() to issue the
update.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in conn_update_sync+0x2a/0xf0 [bluetooth]
Read of size 1 at addr ffff88810c697126 by task kworker/u17:0/377
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
kasan_report+0xe0/0x110
conn_update_sync+0x2a/0xf0 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Allocated by task 466:
hci_conn_params_add+0xa6/0x240 [bluetooth]
load_conn_param+0x4e1/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
Freed by task 474:
kfree+0x313/0x590
hci_conn_params_clear_disabled+0x9b/0xc0 [bluetooth]
load_conn_param+0x4bf/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: extend conn_hash lookup critical sections
Using RCU-protected pointers outside the critical sections without
refcount is incorrect and may result to UAF.
Extend critical section to cover both hci_conn_hash lookup and use of
the returned conn.
Add surrounding rcu_read_lock() also when return value is not used, in
preparation for RCU lockdep requirement to hci_lookup_le_connect().
This avoids concurrent deletion of the conn before we are done
dereferencing it.
Also, make sure to hold hdev->lock when accessing hdev->accept_list.
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix locking in unpair_device/disconnect_sync
Dereferencing RCU-protected pointers outside critical sections is
invalid and may lead to UAF.
Take hdev->lock for hci_conn lookup and hci_abort_conn(). Don't use RCU
to ensure the conn is fully initialized at this point.
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: hold reference for hci_conn in mgmt_pending_cmds
Dereferencing RCU-protected pointers outside critical sections is
invalid and may lead to UAF. Use of hci_conn in hci_sync callbacks also
needs to hold refcount to avoid UAF.
Take appropriate locks for hci_conn lookups, and take refcount for
hci_conn pointers stored in mgmt_pending_cmd so that the pointer stays
valid.
When accessing conn->state, ensure hdev->lock is held to avoid data
race.
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold hdev->lock for hci_conn_params lookups
hci_conn_params_lookup requires hdev->lock be held, otherwise the list
iteration or param access is not safe.
Hold hdev->lock for params lookups in hci_sync.
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: Clear memdump state on invalid dump size
qca_controller_memdump() allocates qca->qca_memdump before processing
the first dump packet. For a sequence-zero packet it then disables IBS,
marks memdump collection active, and reads the advertised dump size.
If the controller reports a zero dump size, the error path frees the
local qca_memdump object and returns without clearing qca->qca_memdump
or undoing the collection state. A later memdump work item initializes
its local pointer from qca->qca_memdump and skips allocation when that
pointer is non-NULL, so it can operate on freed memory. The stale
collection and IBS-disabled flags can also leave waiters or later
transmit handling blocked behind an aborted dump.
Clear the saved pointer and memdump state before returning from the
invalid-size path, matching the cleanup used when hci_devcd_init() fails.
A static analysis checker reported the stale memdump state, and manual
source review confirmed the invalid-size failure path.
In the Linux kernel, the following vulnerability has been resolved:
smb/client: handle overlapping allocated ranges in fallocate
smb3_simple_fallocate_range() can skip holes when an allocated range
returned by the server starts before the current fallocate offset. The
skipped hole is not zero-filled, but fallocate still returns success. A
later write to that hole may therefore fail with ENOSPC.
The function queries allocated ranges so that it can preserve existing
contents and write zeroes only into holes. However, the server may return
a range that starts before the current fallocate offset.
For example, assume the fallocate request is [100, 400) and the only
allocated range returned by the server is [0, 200):
Request: [100, 400)
Server range: [ 0, 200) allocated
Correct:
[100, 200) allocated data, skip
[200, 400) hole, zero-fill
Current:
[100, 300) skipped
[300, 400) zero-filled afterwards
The current code adds the full server range length, 200, to the current
offset 100 and moves to 300. As a result, the hole in [200, 300) is
skipped without being zero-filled.
Fix this by advancing only over the part of the allocated range that
overlaps the current fallocate offset. Ignore ranges that end before the
current offset and reject ranges whose end offset overflows.
This also prevents a malformed range length from causing an out-of-bounds
zero-buffer read.
In the Linux kernel, the following vulnerability has been resolved:
can: raw: add locking for raw flags bitfield
With commit 890e5198a6e5 ("can: raw: use bitfields to store flags in
struct raw_sock") the formerly separate integer values have been integrated
into a single bitfield. This led to a read-modify-write operation when
changing a flag in raw_setsockopt() which now needs a locking to prevent
concurrent access.
Instead of adding a lock/unlock hell in each of the flag manipulations this
patch introduces a wrapper for a new raw_setsockopt_locked() function
analogue to the isotp_setsockopt[_locked]() approach in net/can/isotp.c
[mkl: use Closes tag instead of Link]
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Reject unhashed UDP sockets on sockmap update
UDP sockets get SOCK_RCU_FREE set when (auto-)bound. This means
sk_is_refcounted(unbound) = true, while sk_is_refcounted(bound) = false.
Because sockmap accepts unbound UDP sockets, a BPF program can increment a
socket's refcount via lookup. If the socket is subsequently bound, the
transition from unbound to bound causes bpf_sk_release() to skip the
decrement of the refcount, causing a memory leak.
unreferenced object 0xffff88810bc2eb40 (size 1984):
comm "test_progs", pid 2451, jiffies 4295320596
hex dump (first 32 bytes):
7f 00 00 01 7f 00 00 01 d2 04 1b b7 04 d2 00 00 ................
02 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace (crc bdee079d):
kmem_cache_alloc_noprof+0x557/0x660
sk_prot_alloc+0x69/0x240
sk_alloc+0x30/0x460
inet_create+0x2ce/0xf80
__sock_create+0x25b/0x5c0
__sys_socket+0x119/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0xa1/0x5f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Instead of special-casing for refcounted sockets, reject unhashed UDP
sockets during sockmap updates, as there is no benefit to supporting those.
This effectively reverts the commit under Fixes, with two exceptions:
1. sock_map_sk_state_allowed() maintains a fall-through `return true`.
2. In the spirit of commit b8b8315e39ff ("bpf, sockmap: Remove unhash
handler for BPF sockmap usage"), the proto::unhash BPF handler is not
reintroduced.
Historical note: this issue is related to commit 67312adc96b5 ("bpf: reject
unhashed sockets in bpf_sk_assign").
In the Linux kernel, the following vulnerability has been resolved:
s390/checksum: Fix csum_partial() without vector facility
Currently csum_partial() calls csum_copy() with copy=false and dst=NULL.
On machines without the vector facility, csum_copy() falls back to
cksm(dst, ...), causing the checksum to be calculated from address zero
instead of the source buffer.
The VX implementation already checksums data loaded from src. Make the
fallback do the same by passing src to cksm().
In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Fix VF CCS attach/detach race with in-flight BO moves
xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO
after it transitions NULL/SYSTEM -> TT, and detaches them after it
transitions TT -> SYSTEM. Both operations were done synchronously on
the CPU immediately after building the move's copy/clear fence,
without waiting for that fence to signal. This creates two races with
VF migration:
- Attach happens too late relative to the copy job it is meant to
protect. If the copy job is submitted before the CCS BBs are
attached, a VF migration event that pauses execution mid-copy can
observe partially copied CCS metadata without the attach state
needed to correctly save/restore it.
- Detach happens too early relative to the copy job that moves data
out of TT. The CCS BBs are torn down right after the copy fence is
obtained, while the actual blit may still be in flight. A VF
migration event that pauses execution mid-copy can then race the
save/restore path against the still-running blit, and the CCS BBs
it would need to make sense of the paused state have already been
removed.
Fix both races:
- Move the attach call to before the copy/clear job is submitted, so
the CCS BBs are already registered by the time the copy runs. On
attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy()
now takes the destination resource explicitly, since bo->ttm.resource
is not updated to the new resource until after the move commits.
- Detach only after explicitly waiting for the copy fence to signal,
instead of tearing down the CCS BBs immediately after obtaining it.
While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and
propagate errors: the per-context loop previously never broke out on
error, silently discarding earlier failures. Unwind by clearing each
attached context directly via xe_migrate_ccs_rw_copy_clear() instead of
reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be
attached before it will clean up either one.
(cherry picked from commit d45ad0aa7a1eb5d7288b5ed948b05695611dc39e)
In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Keep scheduler timeline name alive
The scheduler keeps a pointer to the timeline name, but q->name
is freed with the exec queue while scheduler fences can still
reference it.
Store the name in struct xe_guc_exec_queue so it shares
the scheduler's RCU-deferred lifetime.
(cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8)
In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Hold device ref until queue teardown completes
GuC exec queue destruction can run asynchronously. If the final device
put happens from a destroy worker, drmm cleanup can end up draining
the same workqueue and deadlock.
Hold a drm_device reference for the queue lifetime and drop it after
queue teardown completes. This keeps drmm cleanup from running while
async destroy work is still pending.
Move GuC destroy work to a module-lifetime Xe workqueue and flush it
on PCI remove so hot-unbind/rebind still waits for pending destroy work.
With queue-held device refs, guc_submit_sw_fini() cannot run with live
GuC IDs. Replace the fini wait with an assertion and remove the unused
fini_wq.
v2:
- Rebase
v3:
- Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt)
- Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt)
- Drop separate deferred drm_dev_put worker.
- Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini().
v4:
- Replace the guc_submit_sw_fini() wait with an assertion and remove
the now-unused fini_wq. (sashiko)
v5:
- Move destroy work to a module-lifetime Xe workqueue instead of
system_dfl_wq. (Matt)
- Flush the module-lifetime destroy workqueue during PCI remove to
preserve the old device-remove wait semantics.
v6:
- Keep SVM pagemap destroy work on the per-device destroy_wq to avoid
letting it outlive the xe_device/drm_device. (Sashiko)
- Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work
can be queued from the reclaim path.
v7:
- Drop the per-device xe->destroy_wq and use the module-level destroy WQ
for SVM pagemap destroy as well. (Matt)
- Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*()
helpers because the WQ is no longer exec-queue specific. (Matt)
v8:
- Rebase.
v9:
- Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM
destroy_wq because it can be queued from reclaim and embeds
the dev_pagemap used by devres teardown. (Sashiko)
- Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM
from it.
- Update the module-WQ kdoc to document the GuC/SVM split.
v10:
- Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the
workqueue allocation warning.
v11:
- Drop the SVM pagemap destroy comment as it was revision-specific.
(Thomas)
v12:
- Rebase.
(cherry picked from commit da1124abac689cc2b1d8995e5f0a816f8a122edb)
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: pin conn during async oplock break notification
smb2_oplock_break_noti() and smb2_lease_break_noti() store a ksmbd_conn
pointer in an async ksmbd_work and then queue that work on ksmbd-io. The
work only increments conn->r_count, which prevents teardown from passing
the pending-request wait after the increment, but it does not pin the
struct ksmbd_conn object.
If connection teardown races with an oplock break notification, the last
conn reference can be dropped before the queued worker finishes. The
worker then uses the freed conn in ksmbd_conn_write() and
ksmbd_conn_r_count_dec().
Take a real conn reference when publishing the conn pointer to the async
work item, and drop it after the notification work has decremented
r_count. Apply the same lifetime rule to lease break notification, which
uses the same work->conn pattern.
In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix use-after-free of mm_struct in job scheduler
amdxdna_cmd_submit() stores current->mm in job->mm without holding any
reference. aie2_sched_job_run() later access job->mm from the DRM
scheduler worker thread. With only a raw pointer and no structural
reference, the mm_struct can be freed before the scheduler runs the job.
Fix this by calling mmgrab() to hold a structural mm_count reference for
the lifetime of the job, paired with mmdrop() in every cleanup path.
In the Linux kernel, the following vulnerability has been resolved:
tcp: fix TIME_WAIT socket reference leak on PSP policy failure
Release the TIME_WAIT socket reference and jump to discard_it
upon PSP policy failure in both IPv4 and IPv6 receive paths.
This prevents a memory leak of tcp_tw_bucket structures.
In the Linux kernel, the following vulnerability has been resolved:
dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync()
When a dpll_pin is shared across multiple dpll_device instances and
those devices are being unregistered (e.g. during driver module removal),
a NULL pointer dereference can occur in dpll_msg_add_pin_ref_sync().
This happens under the following conditions:
- A pin is registered with two or more dpll devices (dpll_A, dpll_B)
- The pin has ref_sync pairs with other pins
- During unregistration of dpll_A's pins, a ref_sync partner pin is
unregistered first, removing it from dpll_A->pin_refs
- But since the partner pin is still registered with dpll_B, its
dpll_refs is not empty, so dpll_pin_ref_sync_pair_del() does NOT
run and the partner stays in the pin's ref_sync_pins xarray
- When the pin itself is then unregistered from dpll_A, the delete
notification calls dpll_msg_add_pin_ref_sync() which finds the
partner in ref_sync_pins, passes dpll_pin_available() (partner is
still registered with dpll_B), but dpll_pin_on_dpll_priv(dpll_A,
partner) returns NULL because partner was already removed from
dpll_A->pin_refs
- The NULL priv pointer is passed to the driver's ref_sync_get
callback, which dereferences it
BUG: kernel NULL pointer dereference, address: 0000000000000034
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:zl3073x_dpll_input_pin_ref_sync_get+0x73/0x80 [zl3073x]
Call Trace:
dpll_msg_add_pin_ref_sync+0xb8/0x200
dpll_cmd_pin_get_one+0x3b6/0x4b0
dpll_pin_event_send+0x72/0x140
__dpll_pin_unregister+0x5a/0x2b0
dpll_pin_unregister+0x49/0x70
Fix this by skipping ref_sync pins whose priv pointer cannot be resolved
for the current dpll device.
In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_tunnel_key: Defer dst_release to RCU callback
Fix a race-condition use-after-free in tunnel_key_release_params().
The function releases the metadata_dst of the old params synchronously
via dst_release() while deferring the params struct free with
kfree_rcu(). A concurrent tunnel_key_act() reader on the datapath may
still hold the old params pointer (under rcu_read_lock_bh) and proceed
to call dst_clone(¶ms->tcft_enc_metadata->dst) after the writer's
dst_release has already pushed the dst's rcuref to RCUREF_DEAD.
zdi-disclosures@trendmicro.com produced a poc which i (and Victor) verified
that KASAN reports:
==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112
BUG: KASAN: slab-use-after-free in atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326
BUG: KASAN: slab-use-after-free in __rcuref_put include/linux/rcuref.h:109
BUG: KASAN: slab-use-after-free in rcuref_put include/linux/rcuref.h:173
BUG: KASAN: slab-use-after-free in dst_release+0x5b/0x370 net/core/dst.c:168
Write of size 4 at addr ffff88806158de40 by task poc/9388
CPU: 0 UID: 0 PID: 9388 Comm: poc Tainted: G W 7.1.0-rc7 #7 PREEMPT(lazy)
Tainted: [W]=WARN
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378
print_report+0x139/0x4ad mm/kasan/report.c:482
kasan_report+0xe4/0x1d0 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:186
kasan_check_range+0x125/0x200 mm/kasan/generic.c:200
instrument_atomic_read_write include/linux/instrumented.h:112
atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326
__rcuref_put include/linux/rcuref.h:109
rcuref_put include/linux/rcuref.h:173
dst_release+0x5b/0x370 net/core/dst.c:168
refdst_drop include/net/dst.h:272
skb_dst_drop include/net/dst.h:284
skb_release_head_state+0x293/0x400 net/core/skbuff.c:1163
skb_release_all net/core/skbuff.c:1187
[..]
Allocated by task 9391:
kasan_save_stack+0x30/0x50 mm/kasan/common.c:57
kasan_save_track+0x14/0x30 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398
__kasan_kmalloc+0x9a/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263
__do_kmalloc_node mm/slub.c:5296
__kmalloc_noprof+0x2f1/0x830 mm/slub.c:5308
kmalloc_noprof include/linux/slab.h:954
kzalloc_noprof include/linux/slab.h:1188
offload_action_alloc+0x2f/0x130 net/core/flow_offload.c:35
tcf_action_offload_add_ex+0x1ba/0x880 net/sched/act_api.c:258
tcf_action_offload_add net/sched/act_api.c:293
tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547
tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101
[..]
Freed by task 9391:
kasan_save_stack+0x30/0x50 mm/kasan/common.c:57
kasan_save_track+0x14/0x30 mm/kasan/common.c:78
kasan_save_free_info+0x3b/0x70 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253
__kasan_slab_free+0x6b/0x90 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235
slab_free_hook mm/slub.c:2689
slab_free mm/slub.c:6251
kfree+0x21f/0x6b0 mm/slub.c:6566
tcf_action_offload_add_ex+0x4ad/0x880 net/sched/act_api.c:284
tcf_action_offload_add net/sched/act_api.c:293
tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547
tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101
The buggy address belongs to the object at ffff88806158de00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 64 bytes inside of
freed 256-byte region [ffff88806158de00, ffff88806158df00)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88806158d600 pfn:0x6158c
head: order:1 mapcount:0 entire_map
---truncated---
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix auth_hmacs array size in struct sctp_cookie
The auth_hmacs array in struct sctp_cookie is supposed to store a complete
SCTP_AUTH_HMAC_ALGO parameter, which consists of a struct sctp_paramhdr
followed by N HMAC identifiers.
However, the array size was calculated using an extra 2 bytes instead of
sizeof(struct sctp_paramhdr), which is 4 bytes. When four HMAC identifiers
are configured, the HMAC-ALGO parameter stored in the endpoint is larger
than the auth_hmacs buffer in the cookie.
As a result, sctp_association_init() copies beyond the end of auth_hmacs
when initializing the association, corrupting the adjacent auth_chunks
field. This can lead to an invalid HMAC identifier being accepted and later
cause an out-of-bounds read in sctp_auth_get_hmac().
Fix the array size calculation by including the full SCTP parameter header
size.
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review.
In the Linux kernel, the following vulnerability has been resolved:
usb: core: sysfs: add lock to bos_descriptors_read()
Add a lock to the function bos_descriptors_read().
This function accesses udev->bos, which could be simultaneously freed in
usb_reset_and_verify_device(), a function that is commonly called in
drivers all over the kernel.
In the Linux kernel, the following vulnerability has been resolved:
wifi: at76c50x-usb: avoid length underflow in at76_guess_freq()
at76_guess_freq() checks only that the received frame is at least a bare
802.11 header (24 bytes) before subtracting the fixed management-body
offset:
len -= el_off;
For both beacon and probe response frames, el_off is 36. If the frame is
shorter than el_off, subtracting it causes the calculated IE length to
wrap. The length is eventually passed to cfg80211_find_elem_match() as a
very large unsigned value, so the element walk runs beyond the RX skb.
This path is reached from at76_rx_tasklet() while scanning. If the device
delivers a truncated beacon or probe response, the oversized IE length
causes an out-of-bounds read during scanning.
Skip the IE lookup if the frame does not reach the variable elements,
before subtracting el_off.
In the Linux kernel, the following vulnerability has been resolved:
usb: core: port: Deattach Type-C connector on component unbind
connector_unbind() is the mirror of connector_bind(), but it is missing
the symmetric call to typec_deattach() that connector_bind() makes via:
if (port_dev->child)
typec_attach(port_dev->connector, &port_dev->child->dev);
When a Thunderbolt dock is unplugged, two teardown paths race:
1. The component framework calls connector_unbind() first, which sets
port_dev->connector = NULL without calling typec_deattach(). This
leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at
the USB device that is about to be freed.
2. usb_disconnect() then calls typec_deattach(port_dev->connector, ...),
but port_dev->connector is already NULL, so the call is a no-op and
port->usb2_dev is never cleared.
3. Concurrently, UCSI detects a PD partner-disconnect event and calls
typec_unregister_partner(), which reads port->usb2_dev (now a dangling
pointer to freed memory) and passes it to typec_partner_unlink_device()
-> sysfs_remove_link() -> dev_name() on the freed device, corrupting
the typec/UCSI partner state.
This corruption leaves the Thunderbolt tunnel in an inconsistent state on
the next dock hot-plug. On affected hardware the dock's I225/igc NIC fails
to enumerate: AER fires a slot reset while the igc driver is still
initialising ("PCIe link lost"), and the subsequent igc_reset attempt hits
igc_rd32 on an already-detached device:
igc 0000:2e:00.0 eth0: PCIe link lost, device now detached
igc: Failed to read reg 0x0!
WARNING: CPU: 9 PID: 129 at drivers/net/ethernet/intel/igc/igc_main.c:7005
igc_rd32+0xa4/0xc0 [igc]
Call Trace:
igc_disable_pcie_master+0x16/0xa0 [igc]
igc_reset_hw_base+0x14/0x170 [igc]
igc_reset+0x63/0x110 [igc]
igc_io_slot_reset+0x9e/0xd0 [igc]
report_slot_reset+0x5d/0xc0
pcie_do_recovery+0x209/0x400
aer_isr_one_error_type+0x235/0x430
aer_isr+0x4e/0x80
irq_thread+0xf4/0x1f0
4. UCSI later handles the PD partner-disconnect and calls
typec_unregister_partner(), which still sees the stale port->usb2_dev
and tries to remove its sysfs link a second time:
kernfs: can not remove 'typec', no directory
WARNING: CPU: 6 PID: 55 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0xe9/0xf0
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call Trace:
sysfs_remove_link+0x19/0x50
typec_unregister_partner+0x6e/0x120 [typec]
ucsi_unregister_partner+0x107/0x150 [typec_ucsi]
ucsi_handle_connector_change+0x3ec/0x490 [typec_ucsi]
process_one_work+0x18e/0x3e0
worker_thread+0x2e3/0x420
kthread+0x10a/0x230
ret_from_fork+0x121/0x140
ret_from_fork_asm+0x1a/0x30
With worse timing the same stale pointer is dereferenced after the
backing memory is freed, turning the warning into a use-after-free.
Fix the asymmetry: call typec_deattach() before clearing
port_dev->connector, matching what connector_bind() does on the bind side.
typec_partner_deattach() is already protected by port->partner_link_lock,
so it serialises safely with the concurrent typec_unregister_partner() path.
In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Do not put borrowed of_node in probe
omap2430_probe() stores pdev->dev.of_node in a local np variable. This is
a borrowed pointer and the probe function does not take a reference to
it.
The success and error paths nevertheless call of_node_put(np). This drops
a reference that is owned by the platform device, and can leave
pdev->dev.of_node with an unbalanced reference count.
Do not put the borrowed platform device node from omap2430_probe().
References taken for the child MUSB device are handled by the device core,
and the ctrl-module phandle reference is still released separately.