In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
dw8250_probe() registers the 8250 port via serial8250_register_8250_port()
and then, if the device has a clock, registers a clock notifier. If
clk_notifier_register() fails, probe returns the error but leaves the
8250 port registered. The matching serial8250_unregister_port() lives
in dw8250_remove(), which is not called when probe fails, so the port
slot stays occupied until the device is rebound or the system is
rebooted. The devm-allocated driver data is freed while the port still
references it (via the saved private_data and serial_in/serial_out
callbacks), so any access to that port slot before a rebind is a
use-after-free hazard.
Unregister the port on the clk_notifier_register() error path.
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject non-VALID session in compound request branch
smb2_check_user_session() takes a shortcut for any operation that is not
the first in a COMPOUND request: it reuses work->sess (the session bound by
the first operation) and validates only the SessionId, then returns
"valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a
SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation
value) skips even the id comparison. The standalone path
(ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does
enforce the VALID state; the compound branch bypasses all of it.
A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes
a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL
(->user is assigned later, by ntlm_authenticate()). Used as operation 1 of
a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX,
\\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and
reaches ksmbd_ipc_tree_connect_request(), which dereferences
user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704)
-> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd
worker for all clients.
Reject any non-first compound operation that lands on a session which is
not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path
enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session,
but it is never carried as a non-first compound operation, so multi-leg
authentication is unaffected by this check.
In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si
syzbot reported a general protection fault in
vidtv_psi_ts_psi_write_into [1].
vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does
not check for this before dereferencing the returned pointer to access
the continuity counter. This leads to a general protection fault when
accessing a near-NULL address.
The root cause is that vidtv_mux_pid_ctx_init() does not check the
return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs.
If the allocation fails, the PID context is never created, but init
returns success. The subsequent vidtv_mux_push_si() call then gets
NULL from vidtv_mux_get_pid_ctx() and crashes.
Fix both the root cause (add error check in vidtv_mux_pid_ctx_init
for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for
all vidtv_mux_get_pid_ctx() calls.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events vidtv_mux_tick
RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197
Call Trace:
<TASK>
vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline]
vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231
vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196
vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408
In the Linux kernel, the following vulnerability has been resolved:
virtiofs: fix UAF on submount umount
iput() called from fuse_release_end() can Oops if the super block has
already been destroyed. Normally this is prevented by waiting for
num_waiting to go down to zero before commencing with super block shutdown.
This only works, however, for the last submount instance, as the wait
counter is per connection, not per superblock.
Revert to using synchronous release requests for the auto_submounts case,
which is virtiofs only at this time.
In the Linux kernel, the following vulnerability has been resolved:
media: rzv2h-ivc: Fix concurrent buffer list access
The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a
spinlock (`rzv2h_ivc::buffers.lock`). However, in
`rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the
`list_del()` call is executed without holding the spinlock, which makes
it possible for the list to be concurrently modified
Fix that by removing a buffer from the list in the lock protected section.
[assign ivc->buffers.curr in critical section as reported by Barnabas]
In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov8856: free control handler on error in ov8856_init_controls()
The control handler wasn't freed if adding controls failed, add an error
exit label and convert the existing error return to use it.
In the Linux kernel, the following vulnerability has been resolved:
drm/colorop: Fix blob property reference tracking in state lifecycle
The colorop state blob property handling had memory leaks during state
duplication, destruction, and reset operations. The implementation
failed to follow the established pattern from drm_crtc's handling of
DEGAMMA/GAMMA blob properties.
Issues fixed:
- drm_colorop_atomic_destroy_state() was freeing state memory without
releasing the blob reference, causing a leak
- drm_colorop_reset() was directly freeing old state with kfree()
instead of properly destroying it, leaking blob references
- drm_colorop_cleanup() had duplicate blob cleanup code
Changes:
- Add __drm_atomic_helper_colorop_destroy_state() helper to properly
release blob references before freeing state memory
- Update drm_colorop_atomic_destroy_state() to call the helper
- Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state()
for proper cleanup of old state
- Simplify drm_colorop_cleanup() to use the common destruction path
This matches the well-tested pattern used by drm_crtc since 2016 and
ensures proper reference counting throughout the state lifecycle.
Co-developed by Claude Sonnet 4.5.
In the Linux kernel, the following vulnerability has been resolved:
drm/msm: always recover the gpu
Previously, in case there was no more work to do, recover worker
wouldn't trigger recovery and would instead rely on the gpu going to
sleep and then resuming when more work is submitted.
Recover_worker will first increment the fence of the hung ring so, if
there's only one job submitted to a ring and that causes an hang, it
will early out.
There's no guarantee that the gpu will suspend and resume before more
work is submitted and if the gpu is in a hung state it will stay in that
state and probably trigger a timeout again.
Just stop checking and always recover the gpu.
Patchwork: https://patchwork.freedesktop.org/patch/704066/
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add upper bound check for num_of_nodes
drm/amdkfd: Add upper bound check for num_of_nodes
in kfd_ioctl_get_process_apertures_new.
(cherry picked from commit 98ff46a5ea090c14d2cdb4f5b993b05d74f3949f)
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce: Prevent partial address patches
In the case that only one of lo/hi is valid, the patching could result
in a bad address written to in FW.
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: zero-initialize GART table on allocation
GART TLB is flushed after unmapping but not after mapping. Since
amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a
single PTE is written the TLB may speculatively load other uninitialized
entries from the same cacheline. Those garbage entries can appear valid,
and a subsequent write to another PTE in the same cacheline may cause the
GPU to use a stale garbage PTE from the TLB.
Fix this by calling memset_io() to zero-initialize the GART table with
gart_pte_flags immediately after allocation.
Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work
since SDMA needs GART to be initialized to work.
(cherry picked from commit d9af8263b82b6eaa60c5718e0c6631c5037e4b24)
In the Linux kernel, the following vulnerability has been resolved:
mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap()
The mmap_prepare hook functionality includes the ability to invoke
mmap_prepare() from the mmap() hook of existing 'stacked' drivers, that is
ones which are capable of calling the mmap hooks of other drivers/file
systems (e.g. overlayfs, shm).
As part of the mmap_prepare action functionality, we deal with errors by
unmapping the VMA should one arise. This works in the usual mmap_prepare
case, as we invoke this action at the last moment, when the VMA is
established in the maple tree.
However, the mmap() hook passes a not-fully-established VMA pointer to the
caller (which is the motivation behind the mmap_prepare() work), which is
detached.
So attempting to unmap a VMA in this state will be problematic, with the
most obvious symptom being a warning in vma_mark_detached(), because the
VMA is already detached.
It's also unncessary - the mmap() handler will clean up the VMA on error.
So to fix this issue, this patch propagates whether or not an mmap action
is being completed via the compatibility layer or directly.
If the former, then we do not attempt VMA cleanup, if the latter, then we
do.
This patch also updates the userland VMA tests to reflect the change.
A flaw has been found in itsourcecode Courier Management System up to 1.0. Affected by this vulnerability is an unknown functionality of the file /index.php. Executing a manipulation of the argument page can lead to cross site scripting. It is possible to launch the attack remotely. The exploit has been published and may be used.
A vulnerability was detected in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /edit_schoolyr.php. Performing a manipulation of the argument ID results in sql injection. It is possible to initiate the attack remotely. The exploit is now public and may be used.
A security vulnerability has been detected in SourceCodester Class and Exam Timetabling System 1.0. This impacts an unknown function of the file /edit_subject.php. Such manipulation of the argument ID leads to sql injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Block PASID attachment to nested domain with dirty tracking
Kernel lacks dirty tracking support on nested domain attached to PASID,
fails the attachment early if nesting parent domain is dirty tracking
configured, otherwise dirty pages would be lost.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: bound node_desc sysfs read with %.64s
node_desc[64] in struct ib_device is not guaranteed to be NUL-
terminated. The core IB sysfs handler uses "%.64s" for exactly this
reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store()
performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL
termination:
memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX));
If exactly 64 bytes are written via the node_desc sysfs file, the array
contains no NUL byte. The ionic hca_type_show() handler uses unbounded
"%s" and will read past the end of node_desc into adjacent fields of
struct ib_device until it encounters a NUL.
ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by
userspace.
Match the core handler and bound the format specifier.
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Improve validation and configuration of ACR masks
Currently there are several issues on the user space ACR mask validation
and configuration.
- The validation for user space ACR mask (attr.config2) is incomplete,
e.g., the ACR mask could include the index which belongs to another
ACR events group, but it's not validated.
- An early return on an invalid ACR mask caused all subsequent ACR groups
to be skipped.
- The stale hardware ACR mask (hw.config1) is not cleared before setting
new hardware ACR mask.
The following changes address all of the above issues.
- Figure out the event index group of an ACR group. Any bits in the
user-space mask not present in the index group are now dropped.
- Instead of an early return on invalid bits, drop only the invalid
portions and continue iterating through all ACR events to ensure full
configuration.
- Explicitly clear the stale hardware ACR mask for each event prior to
writing the new configuration.
Besides, a non-leader event member of ACR group could be disabled in
theory. This could cause bit-shifting errors in the acr_mask of remaining
group members. But since ACR sampling requires all events to be active,
this should not be a big concern in real use case. Add a "FIXME" comment
to notice this risk.
In the Linux kernel, the following vulnerability has been resolved:
udf: reject descriptors with oversized CRC length
udf_read_tagged() skips CRC verification when descCRCLength +
sizeof(struct tag) exceeds the block size. A crafted UDF image can
set descCRCLength to an oversized value to bypass CRC validation
entirely; the descriptor is then accepted based solely on the 8-bit
tag checksum, which is trivially recomputable.
Reject such descriptors instead of silently accepting them. A
legitimate single-block descriptor should never have a CRC length that
exceeds the block.
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix fsck inconsistency caused by incorrect nat_entry flag usage
f2fs_need_dentry_mark() reads nat_entry flags without mutual exclusion
with the checkpoint path, which can result in an incorrect inode block
marking state. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return true
- f2fs_fsync_node_pages // inode dirtied
- f2fs_need_dentry_mark //return true
- f2fs_flush_nat_entries
- f2fs_write_checkpoint end
- __write_node_folio // inode with DENT_BIT_SHIFT set
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The state observed by f2fs_need_dentry_mark() can differ from the state
observed in __write_node_folio() after acquiring sbi->node_write. The
root cause is that the semantics of IS_CHECKPOINTED and
HAS_FSYNCED_INODE are only guaranteed after the checkpoint write has
fully completed.
This patch moves set_dentry_mark() into __write_node_folio() and
protects it with the sbi->node_write lock.
In the Linux kernel, the following vulnerability has been resolved:
selinux: fix avdcache auditing
The per-task avdcache was incorrectly saving and reusing the
audited vector computed by avc_audit_required() rather than
recomputing based on the currently requested permissions and
distinguishing the denied versus allowed cases. As a result,
some permission checks were not being audited, e.g.
directory write checks after a previously cached directory
search check.
[PM: line wrap tweaks]
A weakness has been identified in SourceCodester Pizzafy Ecommerce System 1.0. This affects the function save_settings of the file /admin/admin_class_novo.php. This manipulation of the argument img causes unrestricted upload. The attack is possible to be carried out remotely.
A security flaw has been discovered in davenardella snap7 up to 1.4.3. The impacted element is the function TSnap7Peer::NegotiatePDULength of the file src/core/s7_peer.cpp. The manipulation of the argument PDULength results in out-of-bounds write. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.
A vulnerability was identified in jxxghp MoviePilot up to 2.13.5. The affected element is an unknown function of the file /jxxghp/MoviePilot of the component Application API. The manipulation leads to improper authorization. Remote exploitation of the attack is possible. The identifier of the patch is dc2b6910a423b3bfadeffaa303e1ba75cfb33900. Applying a patch is the recommended action to fix this issue.
A vulnerability was determined in 1Panel-dev CordysCRM up to 1.4.1. Impacted is the function getSqlBotSrc of the file backend/crm/src/main/java/cn/cordys/crm/system/service/IntegrationConfigService.java of the component Third Party Edit Endpoint. Executing a manipulation of the argument appSecret can lead to server-side request forgery. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.
A vulnerability was found in 1Panel-dev CordysCRM up to 1.4.1. This issue affects some unknown processing of the file backend/crm/src/main/java/cn/cordys/crm/integration/sso/service/TokenService.java of the component Third Party Endpoint. Performing a manipulation of the argument mkAddress results in server-side request forgery. The attack may be initiated remotely. The exploit has been made public and could be used. The project closed the issue report, stating that this is not the official way to report a security vulnerability.
A vulnerability has been found in code-projects Online Examination System 1.0. This vulnerability affects unknown code of the file /account.php?q=quiz. Such manipulation of the argument eid/n/t leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
A flaw has been found in Croogo CMS up to 4.0.7. This affects the function FileManager::isEditable of the file FileManager/src/Utility/FileManager.php of the component Admin File Manager. This manipulation causes path traversal. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability was detected in hunvreus devpush up to 0.4.6. Affected by this issue is the function reset_storage of the file app/workers/tasks/storage.py of the component Storage Reset Failure Handler. The manipulation results in improper check or handling of exceptional conditions. A high complexity level is associated with this attack. The exploitation is known to be difficult. The project was informed of the problem early through an issue report but has not responded yet.
A security vulnerability has been detected in guohongze adminset up to 0.61. Affected by this vulnerability is an unknown functionality of the file delivery/deli.py of the component Delivery Deployment Endpoint. The manipulation of the argument project_id leads to authorization bypass. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.
A weakness has been identified in geex-arts django-jet up to 1.0.8. Affected is an unknown function of the component OAuth Handler. Executing a manipulation can lead to cross-site request forgery. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.
A security flaw has been discovered in geex-arts django-jet up to 1.0.8. This impacts an unknown function of the component OAuth Credential Revoke Handler. Performing a manipulation results in missing authorization. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability was identified in geex-arts django-jet up to 1.0.8. This affects an unknown function of the file jet/dashboard/views.py of the component Dashboard Module. Such manipulation leads to authorization bypass. The attack can be executed remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet.
A security flaw has been discovered in Fantomas42 django-blog-zinnia up to 0.20. Affected by this vulnerability is an unknown functionality of the file zinnia/views/mixins/entry_protection.py of the component Protected Entry Password Handler. The manipulation results in cleartext storage of sensitive information. The attack needs to be approached locally. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability was identified in awesto django-shop up to 1.2.4. Affected is an unknown function of the file shop/models/inventory.py of the component Purchase Stock Handler. The manipulation leads to race condition. The attack is possible to be carried out remotely. The attack is considered to have high complexity. The exploitability is told to be difficult. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability was determined in allegro up to bcf65b994ef29fb3fc2e10b660e6288723d5209e. This impacts the function AssetLastHostname.increment_hostname of the file src/ralph/assets/models/assets.py of the component Hostname Allocation Handler. Executing a manipulation of the argument counter can lead to race condition. Attacks of this nature are highly complex. The exploitability is said to be difficult. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability was found in newpanjing simpleui 2026.01.13. This affects the function self.get_action of the file simpleui/admin.py of the component AjaxAdmin AJAX Endpoint. Performing a manipulation results in missing authentication. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability has been found in Gerapy up to 0.9.13. The impacted element is an unknown function of the file gerapy/server/core/views.py of the component Project Upload Endpoint. Such manipulation leads to missing authentication. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The name of the patch is bd4891c60315f17611a3b7a651ffe0fba7cfe71e. Applying a patch is advised to resolve this issue.
A flaw has been found in django-tastypie up to 0.15.1. The affected element is the function CacheThrottle/CacheDBThrottle of the file tastypie/throttle.py. This manipulation causes race condition. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitability is described as difficult. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability was detected in django-tastypie up to 0.15.1. Impacted is the function ApiKeyAuthentication of the file tastypie/authentication.py. The manipulation results in use of get request method with sensitive query strings. The attack can be launched remotely. This attack is characterized by high complexity. The exploitability is considered difficult. The project was informed of the problem early through an issue report but has not responded yet.
A security vulnerability has been detected in django-oauth django-oauth-toolkit 3.3.0. This issue affects the function _load_id_token of the file oauth2_provider/oauth2_validators.py. The manipulation leads to session expiration. The attack can be initiated remotely. The project was informed of the problem early through an issue report but has not responded yet.
A weakness has been identified in Pluck CMS up to 4.7.21. This vulnerability affects the function htmlspecialchars_decode of the file data/modules/albums/albums.admin.php of the component Albums Module. Executing a manipulation of the argument Info can lead to cross site scripting. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.
A security flaw has been discovered in zevorn rt-claw up to 0.2.0. This affects the function tool_run_script_execute of the file claw/services/tools/script.c of the component Telegram-to-AI Tool Execution Flow. Performing a manipulation results in code injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability was identified in SourceCodester Class and Exam Timetabling System 1.0. Affected by this issue is some unknown functionality of the file /forCYS.php. Such manipulation of the argument course leads to cross site scripting. The attack may be performed from remote. The exploit is publicly available and might be used.
A vulnerability was determined in SourceCodester Class and Exam Timetabling System 1.0. Affected by this vulnerability is an unknown functionality of the file /CYS.php. This manipulation of the argument course causes cross site scripting. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.
A vulnerability was found in zevorn rt-claw up to 0.2.0. Affected is the function claw_net_get/claw_net_post of the file claw/services/tools/net.c of the component http_request. The manipulation results in information disclosure. The attack can be executed remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability has been found in zevorn rt-claw up to 0.2.0. This impacts the function claw_tool_invoke of the file claw/services/swarm/swarm.c of the component RPC Handler. The manipulation leads to incorrect authorization. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.
A flaw has been found in nextlevelbuilder GoClaw up to 3.13.3-beta.3. This affects the function ExecTool.Execute of the file goclaw/internal/tools/credentialed_exec.go. Executing a manipulation can lead to improper authorization. The attack may be launched remotely. The exploit has been published and may be used.
A vulnerability was detected in Sipeed PicoClaw up to 0.2.9. The impacted element is an unknown function of the file web/backend/middleware/access_control.go of the component First Run Setup. Performing a manipulation of the argument allowed_cidrs results in authentication bypass using alternate channel. The attack may be initiated remotely. The attack's complexity is rated as high. The exploitability is regarded as difficult. The exploit is now public and may be used. The patch is named 017601354be38cb027ff3ffb01aed79bd5d12610. Applying a patch is the recommended action to fix this issue.
A security vulnerability has been detected in Sipeed PicoClaw up to 0.2.9. The affected element is the function handleMessageReceive of the file pkg/channels/feishu/feishu_64.go of the component Group Message Handler. Such manipulation leads to missing authorization. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The reported GitHub issue was closed automatically due to inactivity.